News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

72 charger dash assembly help

Started by 72charger1111, July 09, 2016, 05:31:09 PM

Previous topic - Next topic

72charger1111

Hello,

It's been a few years since taking this dash apart, I didn't think it would take this long, and now I know to always take pictures. I am working on the three wire loom brackets, I can't find where they go. Does anyone have pics of the rear of a 71,72 standard dash.

Nacho-RT74

Right one On dash pad studs over glovebox liner...

Left one. On driver side area, close to the ground wire fastener as far recall

I haven't seen the middle one on my car

Have a pic but at home
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html