News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

My new patina'd RR1 burgundy 1968 Charger ("Ribeye")...mostly original paint

Started by 70B5Cuda, March 29, 2020, 09:36:25 AM

Previous topic - Next topic

moparstuart

Quote from: hemi-hampton on October 02, 2021, 12:13:24 PM
If you want to lighten Rust near Battery Tray & not remove Paint go to Hardware Store & buy Navel Jelly or Zud (mix zud into paste) & spread over Rust. This will remove the Rust & not damage Paint, These 2 Products contain Oxalic Acid which is the best Chemical Rust remover. LEON.
on my Muscle bikes I restore  i use a mixture of CLR and Comet and it makes a paste and does the same thing   
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

70B5Cuda

Quote from: moparstuart on October 04, 2021, 08:13:15 AM
Quote from: hemi-hampton on October 02, 2021, 12:13:24 PM
If you want to lighten Rust near Battery Tray & not remove Paint go to Hardware Store & buy Navel Jelly or Zud (mix zud into paste) & spread over Rust. This will remove the Rust & not damage Paint, These 2 Products contain Oxalic Acid which is the best Chemical Rust remover. LEON.
on my Muscle bikes I restore  i use a mixture of CLR and Comet and it makes a paste and does the same thing   


Thanks!
1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

moparstuart

Quote from: 70B5Cuda on October 04, 2021, 01:12:32 PM
Quote from: moparstuart on October 04, 2021, 08:13:15 AM
Quote from: hemi-hampton on October 02, 2021, 12:13:24 PM
If you want to lighten Rust near Battery Tray & not remove Paint go to Hardware Store & buy Navel Jelly or Zud (mix zud into paste) & spread over Rust. This will remove the Rust & not damage Paint, These 2 Products contain Oxalic Acid which is the best Chemical Rust remover. LEON.
on my Muscle bikes I restore  i use a mixture of CLR and Comet and it makes a paste and does the same thing   


Thanks!
spread it on thick let it dry harden to a crust then take it off   
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

70B5Cuda

With 5 kids, work, school board, etc, I've not been making much progress on this charger. But I've also been trying to be patient as I've been waiting to make a deal with a previous owner for the complete numbers matching 383-4. I've known where the engine was for the last 3 years and the owner was willing to sell it. The engine is in a Satellite he owns and it hasn't run in over 20 years. We even came to an agreement on price three years ago, but I can't get him to take any action. I've offered to pull the engine for him...I've offered more money for it...He has turned down my offer to pull it and he just won't ever get around to doing it himself. After three years, I've come to the conclusion it won't happen any time soon and I'm tired of waiting. I had also completely rebuilt and powder coated all the front suspension. So the direction is changing for the better.

I'm going Gen 3 hemi, A518, Vintage Air, and RMS front/rear suspension.




Also, I noticed that there is not blackout treatment on the front of the radiator support...and the radiator support has not been repainted.

1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

70B5Cuda

I'm also going with disc brakes and bigger wheels. Don't judge the wheels just yet. It will look a lot better at ride height, which will be lower. If I didn't mention it earlier, I had my paintless dent repair guy work out the hail dents and door dings.



1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

hemi-hampton

Odd no black out on front but I've heard on Dark Colors like Black & B9 dark Blue they may not get it because of the dark Color. BUT, I Restored a Rare 1 of 2 Known (with automatic, 9 with 4 speed) Black 70 T.A Challenger. Even though it was Black the Core Support was still Blacked out flat Black which I thought was odd.  So I reduplicated it. LEON.

375instroke

Quote from: 70B5Cuda on March 12, 2023, 03:05:36 PMI'm also going with disc brakes and bigger wheels. Don't judge the wheels just yet. It will look a lot better at ride height, which will be lower. If I didn't mention it earlier, I had my paintless dent repair guy work out the hail dents and door dings.




That looks familiar.  Michelin Pilot Sport AS-4 on US Wheel Chrysler OE Series?  Have you tried fitting hubcaps?




tan top

Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

70B5Cuda

RMS 4 link has been mocked up. Will need to pull/paint/reinstall later.


1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60


70B5Cuda

Catching up a little bit...

Got the Charger up on the lift to mock up the drivetrain...




Mounted the cast manifolds first, which are from a 6.4L Jeep Cherokee SRT8. These headers are cheap and they actually came factory on Jeep SRT8's which had 485hp, so they can handle the power and won't break easily. I paid $125 plus shipping for them. The driver's side engine mount had to be redone to accommodate the cast headers. The mount was originally straight...now it is curved.
 
1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

70B5Cuda

It's kind of hard to see in these first two pictures, but the tunnel had to be clearanced to get the transmission up into the tunnel where it needed to be.




The torsion bar crossmember lips were trimmed down in the tunnel and a plate was welded in.



1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

6T8440

Driving through the towns and neighbourhoods that are us.

70B5Cuda

1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

70B5Cuda

1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

70B5Cuda

I'm going to make a real push to get this thing together and running before summer is over. I sent the transmission crossmember out for powdercoating but took a couple pics first.



1968 Roadrunner-6.1L, 6 speed, 3.91 Getrag, IRS
1968 Charger- 6.1L, TR-6060, 9"
1968 Charger in RR1 "Ribeye"
1969 Charger in EW1 "S'more"
1969 Charger Survivor-R6, 383, 727.....WRECKED
1970 Barracuda-6.1L, 6 speed, 4.10 S60

orange383

Great work.
I may have to copy your subframe connector design for my charger.
Looks solid!