News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Scissor Jack found in Daytona Trunk - What is it?

Started by RSI700VIPER, February 05, 2023, 06:19:17 PM

Previous topic - Next topic

RSI700VIPER

Obviously not a Daytona jack but shares many features including the bearing.  Any idea what it's from?  Can the centering pin be added to the top to clone a Daytona jack?
69 V2 Daytona 440 4-Speed 3.54 Dana
70 FJ5 Superbird 440+6 4-Speed 3.54 Dana
69 Talladega Torino 428 CJ
69 Mercury Cyclone Spoiler II Gurney Special
70 T6 Challenger T/A 4-speed
70 V2 Challenger R/T 440 Six Pack 4-speed
71 FC7 Challenger Vert Flemington Speedway Pace Car
71 V2 Challenger RT Formal Roof w/ V2 Stripe & Houndstooth

Wingnut426

It is an aftermarket jack sold by many parts houses, (many years ago).  It is the heavy duty version.  Not close enough to pass for a real Superbird/Daytona jack.
Weld a knob on top and sell it for a clone. WINGNUT
HEMI Daytona Convertible

nascarxx29

1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

nascarxx29

Sears jack
1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

Redbird

It seems like a variety of similar jacks used to be commonly available.

I'm not sure if Custer Manufacturing was the only supplier supplying the similar jacks under a propriety umbrella.

Here is a page from a Mopar Multi-Purpose Line catalog. Page dated August 1969.

It is a 1 1/2 ton Mechanical Screw Jack. I know it does not have the cut-outs on the base sides.

Redbird