News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

295/65/15

Started by JMF, August 09, 2024, 04:16:39 AM

Previous topic - Next topic

JMF

Just wondering would a M/T 295/65/15 on a 15 x 8 wheel with 3.75" BS fit under the rear of a 68 Charger ? Stock suspension height

I know a 295/50 is a more common choice but I don't like the low profile on the 295/50's, I prefer taller tires on the rear

Or another option would be a 15 x 10 with 4" BS

The wheels I'm buying are the ARE outlaw 1's which look like the old Centerlines , unfortunately they only come in that backspace and as far as I know centerlines themselves don't offer the 5" BS like they used to years ago

Many thanks

Kern Dog

That is a 30" tall tire. It will look stupid.

Dino

I don't like the 295/50 either. 275/60 is 28" tall and looks great.
Extraordinary claims require extraordinary evidence.

John_Kunkel

In the absence of real world experience from others, you might try this:

https://www.willtheyfit.com/

Not everybody agrees on what "looks stupid" so follow your own tastes.
Pardon me but my karma just ran over your dogma.

JMF


JMF

So i finally managed to try some wheels i have on the Charger so please can I get people's opinions on whether you think the 295/65's will fit or not ?

So in the pics these are 15 x 8 Centerlines with 5" backspace and 275/60/15's

Ideally I will be using these wheels

Width wise I have quite a lot of clearance and good clearance on the top section of the tire where it goes towards the inner arch and the Charger "bulge"

But the only bit that worries me is the gap between the front of the rear tire and the rear quarter, see first pic

I was struggling to get an accurate measurement but I think it's about 1.5" , possibly a little bit more

So I think when the 295/65 is fitted its going to be about 1/2" gap because they have an extra 1" sidewall compared to these 275's

I will try again at the weekend with some vernier callipers I have to get a more accurate measurement of that gap

I know the 275's are a popular choice for many but they still look too small to me in the Charger arch , and I don't like 295/50's either because they are too short and not much sidewall so 295/65 is the kind of look I like

295/60 would probably be a perfect size but it doesn't look like anyone makes those

I did consider 255/70 as it has the larger sidewall what I like but they are narrower obviously than the 275's

Thanks for any advice

Some pics below and a quick video in the link......

https://imgur.com/a/jghSA7l