News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

Heater blower

Started by tucknroll, November 01, 2025, 10:38:11 AM

Previous topic - Next topic

tucknroll

Hey 69 charger here.  My fan blows good heat but not hard enough.  Do the blower motors get weaker and maybe a new one will blow harder?  Thanks

b5blue

Check the resisters.

tucknroll

It's working on high and low so I think it's just worn out

John_Kunkel

Temporarily connect the motor directly to battery voltage and compare the output to HIGH on the control panel.
Pardon me but my karma just ran over your dogma.

tucknroll


Nacho-RT74

Question...
 Is it an A/C car?
Venezuelan RT 74 400 4bbl, 727, 8.75 3.23 open. Now stroked with 440 crank and 3.55 SG. Here is the History and how is actually: http://www.dodgecharger.com/forum/index.php/topic,7603.0/all.html
http://www.dodgecharger.com/forum/index.php/topic,25060.0.html

tucknroll

Where do I check the resistors please?

tucknroll

So I connected it straight to the battery and it turned super fast but I plugged it back up and it ran slow again.  Any ideas?

b5blue


John_Kunkel


You've proved that the motor is good so now look at the resistor block or the fan switch. It's not uncommon to find the spade connectors at the fan switch fried.
Pardon me but my karma just ran over your dogma.

tucknroll

How do I bypass the resistor? Running on high is fine with me