Voltage limiter

[Silver R/T]

Where does this part go? Does it go on the back side of gauge cluster or inside of engine bay?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=007&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=170064268593&rd=1&rd=1

[Chryco Psycho]

back side of the guage panel , it pulses 5-6V to feed the guages

[8WHEELER]

Goes in here......right next to the speedo.

Dan

[Silver R/T]

Thanks, definitely need to get one of those. No wonder my gauges don't work.

[Rolling_Thunder]

just make one...     one of the mopar mags built one...   runs about $5.00 and works better...    it doesnt use 3000 year old technology

[Silver R/T]

as long as all the gauges work I don't care. I was considering just getting all the autometer gauges and doing custom gauge cluster but Im kind of changin my mind. Seems a lot of money just for the gauges and then every mopar freak will bitch at me "not original, non-numbers matching, bleh bleh" lol

[lookin@my68]

just make one...     one of the mopar mags built one...   runs about $5.00 and works better...    it doesnt use 3000 year old technology

Hey Silver, here is a link I found today....http://www.moparts.com/Tech/Archive/elec/11.html

[Silver R/T]

thanks for info

[Silver R/T]

Goes in here......right next to the speedo.

Dan

why do you have that piece of paper underneath it?

[RECHRGD]

Silver, go to www.gcartrim.com.  The guy is right here in beautiful Chattaroy WA.. He puts a solid state regulator in the original housing.  Doesn't look stock though because of drilled vent holes and a heat sink.  I got one from him, but haven't installed it yet.  I've got a new Y/O dash harness to install, so I'll do it all at the same time.   Bob

[Silver R/T]

Ive already bought mine. theyll need it to upgrade anyways as it says on site. Looks like cool site, I havent seen it before.