News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

ANYBODY NEED A REPRO JACK CHEAP

Started by BigBlockSam, November 20, 2007, 12:00:11 PM

Previous topic - Next topic

BigBlockSam

I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

rav440

QuoteANYBODY NEED A REPRO JACK CHEAP

REPLICA  :slap:  :smilielol: :icon_smile_big: :cheers: :2thumbs:
1973 PLYMOUTH road runner GTX



daytonalo

Those jacks can be bought for under 50 bucks , they are much thinner and slightly smaller than orig one's

Larry

hotrod98

I wouldn't mind buying a couple of those for $50 each. After all, my cars are just clones and I'll bet you money that it never leaves the trunk again. I put the jack assembly in the trunk of my 71 cuda 8 years ago and it hasn't been out since.


Normal is an illusion. What is normal for the spider is chaos for the fly.
Charles Addams

BigBlockSam

QuoteThose jacks can be bought for under 50 bucks 

where ? i can use one or two . it will never leave my trunk either. Rene
I won't be wronged, I wont be Insulted and I wont be laid a hand on. I don't do these things to others, and I require the same from them.

  [IMG]http://i45.tinypic.com/347b5v5.jpg[/img

moparstuart

Quote from: BigBlockSam on November 21, 2007, 12:43:44 AM
QuoteThose jacks can be bought for under 50 bucks 

where ? i can use one or two . it will never leave my trunk either. Rene
me too i need two also
GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

daytonalo

Yes , but you have to modify bottom, weld nub , and flare ends

moparstuart

 so it will look close( and never get used )   get me two for my cars

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

rav440

Quote from: daytonalo on November 20, 2007, 11:56:07 PM
Those jacks can be bought for under 50 bucks , they are much thinner and slightly smaller than orig one's

Larry

this isnt the type of jack you are thinking of . this is much older , i think it my be a ford jack , this is a sturdy well built jack the steel is 1/8" . the one i think you are talking about is this jack .




RANDY
1973 PLYMOUTH road runner GTX



hotrod98

I had a few of those jacks years ago and threw them away. Wish I had them back now. I would just make the mods that Larry mentioned and live with it.


Normal is an illusion. What is normal for the spider is chaos for the fly.
Charles Addams

daytonalo

You can buy that Jack all day long !!! I ordered one a while back , after it came in , i said no way , it was paper thin . I have 50 1969 Scissor jacks that were made by the same  co that made the Daytona jack . I modify them to look like daytona jack

rav440

Quote from: daytonalo on November 21, 2007, 07:06:43 PM
You can buy that Jack all day long !!! I ordered one a while back , after it came in , i said no way , it was paper thin . I have 50 1969 Scissor jacks that were made by the same  co that made the Daytona jack . I modify them to look like daytona jack

LARRY , what mods do you have to make to those original jacks ? just the "  top locator pin  " ? what company made the jack for the DAYTONA & SUPERBIRD ? from what i understand it was a modified ford scissor jack . or is that wrong ?

RANDY

1973 PLYMOUTH road runner GTX



daytonalo

I think it was  the custer co ???? Not sure

nascarxx29

Custer manafacturing out of Ohio was Chyslers jack vendor
1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

daytonalo


nascarxx29

1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

rav440

what does " REISSUED "F" SERIES " mean ? is that F series in ford F series ?  :shruggy:
1973 PLYMOUTH road runner GTX



nascarxx29

http://wwnboa.org/daytdetails.htm
This is the scissor jack in the original box, with the front license plate mounting bracket sitting on the box. This is the correct all-red Daytona front jack. The color is basic "red", not orange-red or black. Superbird front jacks are black. Note that the jack screw, bearing, handle receptacle, are NOT red. The jack was fully assembled when painted, minus those parts.  The Daytona scissor jack was known to be made at Custer Manufacturing Company. This is known from factory paperwork and blueprints, not found with this car.


1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

nascarxx29

This one is typical of what you can find at a flea market for a few bucks .Lacking in certain details And you could maybe take this existing jack and taper the end shaft weld on top locator pin and cut out the feet and drill the hole for the cotter pin limiter and add the collar bearing.

1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

nascarxx29

I searched the net for custer manafacturing Ohio And found this vendor with similar name in MI .
   




Company Profile

Custer Tool & Manufacturing Co.
7714 Secor Rd.
Lambertville, MI 48144
Phone: 734-854-5943
Fax: 734-854-4189


Prototype To Production Machine Work, Tool Grinding Service

Sales: Under $1 Mil
Employees: 1-9
Activities: Distributor, Service Company
Export Markets: Latin America/Caribbean, Western Europe


1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701

daytonalo

my jack and handle I made

daytonalo

more junk

rav440

so how can one really tell if they have an original DAYTONA & SUPERBIRD jack ?  :shruggy: kinda makes me wonder if the ones that have sold on EBAY lately were really real original jacks or just well made copies made to look like they were aged . being there are no part or ID #s stamped on them , makes me think a dishonnest person " we all know there are none of them on EBAY "  :smilielol:  could turn a $50.00 jack into a $3000.00 with a few hrs of work .

i guess though if your spending that kind of $$$ on a jack you damn sure better know what you looking at .  :shruggy:
1973 PLYMOUTH road runner GTX



daytonalo

My jacks are brand new late 60's vintage nos jacks , I made the handle

nascarxx29

If custer manafacturing who supplied them to chrysler as a vendor .And you located the company and bought left overs 60-s vintage NOS ones.Wouldnt you have memos or correspondances as documentation from the original company and supplier on this transaction to accompany your jacks .Showing this is as close as you can get to a original.From jacks recieved from the original vendor for modification.That should only require a welded on location pin and color to paint it.And have all known correct original jack details
1969 R4 Daytona XX29L9B410772
1970 EV2 Superbird RM23UOA174597
1970 FY1 Superbird RM23UOA166242
1970 EV2 Superbird RM23VOA179697
1968 426 Road Runner RM21J8A134509
1970 Coronet RT WS23UOA224126
1970 Daytona Clone XP29GOG178701