|
T16
|
 |
« Reply #20 on: February 05, 2010, 02:20:02 PM » |
|
Here are the wheels I plan on getting,  Nice project.. I like those rims.. (got them on my 72)  |
|
|
|
|
Logged
|
|
|
|
|
SG1022
|
|
« Reply #21 on: February 05, 2010, 02:42:11 PM » |
|
Here are the wheels I plan on getting, Nice project.. I like those rims.. (got them on my 72) Thanks, I checked your signature and liked the pictures. Do you have any center caps for them? That was my plan but I can't find any pictures with center caps and chrome Lugs on a charger. |
|
|
|
|
Logged
|
|
|
|
|
SG1022
|
|
« Reply #22 on: February 06, 2010, 08:19:38 PM » |
|
Took my 360 block down to Ray Today, good two hour drive. We decided to take it out of the trailer and load it into the back of my brother's jeep, but he didn't make it in time so we put it in the back of a Forester. This was our original plan.  The boards almost snapped when I stood on them so we decided to do it by hand.  I should be picking up the J castings monday, but I leave for work tonight and don't get off till Monday so I will be away for a while. |
|
|
|
|
Logged
|
|
|
|
teddy1500
Junior Member
 Offline
Posts: 64
|
|
« Reply #23 on: February 06, 2010, 10:51:28 PM » |
|
Project looks good, I think that you may want to retink the 215 tire up front, with the large wheelwells these cars have, a 245/60 fits well, the 215 look puny. (been there, done that)
|
|
|
|
|
Logged
|
|
|
|
|
SG1022
|
|
« Reply #24 on: February 06, 2010, 11:24:57 PM » |
|
Project looks good, I think that you may want to retink the 215 tire up front, with the large wheelwells these cars have, a 245/60 fits well, the 215 look puny. (been there, done that)
Thanks much, Wasn't sure on the wheel size yet. Was just ballparking |
|
|
|
|
Logged
|
|
|
|
teddy1500
Junior Member
Offline
Posts: 64
|
|
« Reply #25 on: February 06, 2010, 11:54:59 PM » |
|
I hope that you tied that motor down before you took it where it was going. That is alot of weight comming up front if you have to lock up the brakes.
|
|
|
|
|
Logged
|
|
|
|
|
moparguy01
|
|
« Reply #26 on: February 06, 2010, 11:59:03 PM » |
|
i run 255s on the front of mine, and 295s out back.
there was a time i ran 275's on all 4 corners. it looked pretty mean.
|
|
|
|
|
Logged
|
 BEWARE DARKNESS, SCREWED ME FOR A $75!!! Dont do business with this guy!!! |
|
|
|
SG1022
|
|
« Reply #27 on: February 07, 2010, 01:12:34 AM » |
|
i run 255s on the front of mine, and 295s out back.
there was a time i ran 275's on all 4 corners. it looked pretty mean.
Was that on a 3rd gen? If so, do you have any pictures? I am not to big a fan of equal size wheels, the back has to be bigger  |
|
|
|
|
Logged
|
|
|
|
CurtisC
New Member
Offline
Posts: 20
|
|
« Reply #28 on: February 07, 2010, 01:58:34 AM » |
|
I run 255s on the front and 275s on the back, looks awesome.
|
|
|
|
|
Logged
|
|
|
|
Dodgecharger74
Junior Member
Offline
Posts: 64
|
|
« Reply #29 on: February 07, 2010, 06:53:17 AM » |
|
I am doing a engine swap now repaint engine bay & installing a 360 stroked to 408 I will be wathing this thread I will post pic's of mine later
|
|
|
|
|
Logged
|
74 charger se
82 dodge PU fleetside short box 440
66 dodge dart GT 273 convert
05 magnum 5.7 Hemi
|
|
|
|
SG1022
|
|
« Reply #30 on: February 08, 2010, 05:19:19 PM » |
|
Ray pulled the engine apart.  Dirtiest engine award?  Busted Skirts  The Boiler is Next |
|
|
|
|
Logged
|
|
|
|
Rayzor
Junior Member
Offline
Posts: 186
|
|
« Reply #31 on: February 08, 2010, 07:19:39 PM » |
|
Why is it I have the feeling my work is following me home...... |
|
|
|
|
Logged
|
|
|
|
|
SG1022
|
|
« Reply #32 on: February 08, 2010, 08:06:55 PM » |
|
Why is it I have the feeling my work is following me home...... Not sure, but you need to stop trading for broken guns. That guy is rippin ya  . Did you fire the 10/22 yet? |
|
|
|
|
Logged
|
|
|
|
|
moparguy01
|
|
« Reply #33 on: February 09, 2010, 05:48:36 AM » |
|
i dont have any good pics of the tires on there now, I'll see if i can't take some soon.
|
|
|
|
|
Logged
|
BEWARE DARKNESS, SCREWED ME FOR A $75!!! Dont do business with this guy!!! |
|
|
|
SG1022
|
|
« Reply #34 on: February 15, 2010, 06:39:09 PM » |
|
Here are the pictures just getting the block out of the tank   Here is a picture of Ray weighing the pistons, he will probably end up lightening them.  I have been wokring alot lately so I havent had too much time to work on the car, but I get off tonight. |
|
|
|
|
Logged
|
|
|
|
Rayzor
Junior Member
Offline
Posts: 186
|
|
« Reply #35 on: February 15, 2010, 11:17:12 PM » |
|
Look at the pic of the block on the dolly. You can see the rust holes threw the freeze plugs. There was so much crud built in there I doubt they leaked!  |
|
|
|
|
Logged
|
|
|
|
Dodgecharger74
Junior Member
Offline
Posts: 64
|
|
« Reply #36 on: February 16, 2010, 05:48:26 PM » |
|
You can use a driverside 318 mount on a 360, if you use a spacer.
just installed the mounts on my 360 for that spacer I used a 1/2" nut for spacer with threads drilled out to fit on a grade 8 shoulder bolt keeps things tight with no angle to that bolt |
|
|
|
|
Logged
|
74 charger se
82 dodge PU fleetside short box 440
66 dodge dart GT 273 convert
05 magnum 5.7 Hemi
|
|
|
|
SG1022
|
|
« Reply #37 on: February 17, 2010, 08:21:29 PM » |
|
Well I changed plans from 308 Castings to Magnums. I got the heads, bolts, covers, valves and a few extras for 150$ from a local store. Now I just have to find somebody who wants mopar performance valve covers for a small block non magnum    |
|
|
|
|
Logged
|
|
|
|
|
