440 Source stroker windage trays....

[Blakcharger440]

It says on their website that you have to modify the windage tray to fit your combination. I ordered my 512 kit today. How much modification will be needed to make it work and has anybody else used it?

It says it will fit strokes up to 4.5inches.

[doctorpimp]

I used it on my 400 - 470, with 1/2" pick-up.
All I had to do was dent the area a little bit, in front of the pick-up in order to gain clearance.
No too much of a modification.  I could have cut it out with a dremel, but I didn't have to.
There was still plenty of clearance for the crank.

[Mick70RR]

The tray works without modification but the oil pickup they sell doesn't. The pickup hits the tray and will need some work to get it to clear.

[73charger528cid]

On my 528 stroker with 4.375" stroke the pan worked fine but I went with a mancini raceing single pickup exsternal oil system so there was no pickup tube to worry about.