DodgeCharger.com Forum
November 21, 2008, 10:14:36 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Please remember: this is the place to discuss Chargers - NOT the place to discuss politics. Political posts will be locked or deleted at the Moderator's discretion.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 69 tail panel  (Read 98 times)
Brightyellow69rtse
Junior Member
**
Offline Offline

Posts: 187



« on: August 22, 2008, 07:39:37 PM »

ok i took the car off the road today. im planning to do a bunch of stuff thats basicly free or just my time and labor. i was thinkinf of removing the tailpanel. mine has a couple bubbles in it and it bothers me. is it easily removable or is it welded it? id rather just take it off to work on it if i could. thanks, Mike
Logged

1969 R/T SE 4 speed, dana 60 4.10's  400, holley 750 vac sec. msd 6al, blaster 2 , msd superconductor wires, heavily ported holley street dominatior intake, cut 452 heads, 3 angle valve job, summit cam (larger of the 2) comp springs, hedmans, 40 series deltas,, h-pipe and cutouts. <br /><br />03 hemi ram reg cab airaid main tube, trueflow filter, homemade ram air, ultraflow muffler, cutout, superchips (performance setting) intake temp wire mod, rumblebee style scoop, rumblebee stripes more to co
1hot68
Global Moderator
Old Timer
*****
Offline Offline

Posts: 3,599



« Reply #1 on: August 22, 2008, 07:45:27 PM »

Lots of welds, lots and lots of spot welds.
Logged

1968 Dodge Charger R/T Clone...493 stroker Tremec 5 Speed And Dana60 3.54Sure-Grip

My Charger is a hybrid car, it burns gas and rubber.
Brightyellow69rtse
Junior Member
**
Offline Offline

Posts: 187



« Reply #2 on: August 22, 2008, 08:02:37 PM »

damn.... looks like ill be doin it on the car then. thanks
Logged

1969 R/T SE 4 speed, dana 60 4.10's  400, holley 750 vac sec. msd 6al, blaster 2 , msd superconductor wires, heavily ported holley street dominatior intake, cut 452 heads, 3 angle valve job, summit cam (larger of the 2) comp springs, hedmans, 40 series deltas,, h-pipe and cutouts. <br /><br />03 hemi ram reg cab airaid main tube, trueflow filter, homemade ram air, ultraflow muffler, cutout, superchips (performance setting) intake temp wire mod, rumblebee style scoop, rumblebee stripes more to co
Pages: [1]   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.7 | SMF © 2006-2008, Simple Machines LLC Valid XHTML 1.0! Valid CSS!
Page created in 0.032 seconds with 15 queries.