|
SFRT
|
 |
« on: September 19, 2008, 05:57:11 PM » |
|
 at 3 om on a friday. lol. anyways heres the build: 440 HP block bored .40 over crank polished etc clutch n flywheel balanced ( proforce), Lakewood bellhousing indexed etc will have 2.5" TT2 headers n 3" X pipe with electric cutouts edelbrock performer aluminum heads and intake KB pistons 10.9-1 compression eagle balanced connecting rods origina ductile mopar rocker arms and pushrods comp cam .525 lift 231/237 duration milodon lo profile large capacity oilpan and pickup msd ignition and distributor ( 6AL-2) proform 850 double pumper hemi oil pump large capacity mech fuel pump main girdle aluminum water pump 7 blade hemi mechanical fan with clutch march serpentine belt system all new bearings etc etc. gonna stick it all in the car in the next week and see what my butt dyno reads. 'on paper' they tell me it should be somewhere north of 550 HP. I will be happy if it ends up at 500. I will prolly chassis dyno it next month. the drivetrain is a 18 spline a833 and a girdled dana 60 |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
41husk
|
|
« Reply #1 on: September 19, 2008, 05:59:33 PM » |
|
Congrats ! sounds like a screa :2thumbs:mer
|
|
|
|
|
Logged
|
1969 Dodge Charger Daytona clone 440/727
1970 Challenger convertible 340/727
1973 Charger Rallye (WannaBee) 440/727
|
|
|
|
SFRT
|
|
« Reply #2 on: September 19, 2008, 06:00:20 PM » |
|
I hope!  |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
SFRT
|
|
« Reply #3 on: September 19, 2008, 06:03:07 PM » |
|
|
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
General_01
|
|
« Reply #4 on: September 19, 2008, 07:05:14 PM » |
|
Sounds great. It's all downhill from here.  |
|
|
|
|
Logged
|
1971 Dodge Charger Super Bee
496 stroker
4-speed
|
|
|
|
Steve P.
|
|
« Reply #5 on: September 19, 2008, 08:04:27 PM » |
|
Do you know which KB pistons are in it??
84 or 88cc heads??
|
|
|
|
|
Logged
|
Steve P.
Holiday, Florida
|
|
|
|
SFRT
|
|
« Reply #6 on: September 19, 2008, 10:09:23 PM » |
|
the pistons are KB 822 forged.
on the heads, I gotta look at that sunday when I go back down to the shop...as i cannot remember.
|
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
Steve P.
|
|
« Reply #7 on: September 19, 2008, 10:55:42 PM » |
|
Ok, cool. I am using KB's also, but mine are the HYPO!(&*$&#(^!%$@... Never used them before.. At this rate it will be another year before I get to see if I like them..  |
|
|
|
|
Logged
|
Steve P.
Holiday, Florida
|
|
|
|
CB
|
|
« Reply #8 on: September 20, 2008, 03:39:17 AM » |
|
wow looks like you gonna be driving a cool machine very soon!
good luck with your new engine
CB
|
|
|
|
|
Logged
|
´69 Charger / 383/4bbl 4-spd |
|
|
firefighter3931
Global Moderator
Old Timer
 Offline
Posts: 8,114
572 street/strip bullet
|
|
« Reply #9 on: September 20, 2008, 07:14:38 AM » |
|
Lookin good SFRT ! As for power i would expect it to be very close to Ricky's build which made just shy of 500hp but LOTS of tire twisting torque. You guys should line them up at Infineon for Bay area braggin rights.  Ron Ps. Here's a rundown on Ricky's combination and dyno results : http://www.dodgecharger.com/forum/index.php/topic,36603.0.html |
|
|
|
|
Logged
|
68 Charger R/T "Black Pig" Street/Strip bruiser, 70 Charger R/T 440-6bbl Cruiser. Firecore 50 authorized dealer ; contact me with your needs
|
|
|
|
SFRT
|
|
« Reply #10 on: September 20, 2008, 09:38:57 AM » |
|
torque is what i wanted as I am hoping for a stop sign to stop sign warrior. I think I am going to swap my 8" rear wheels for a set of 10"er's as well, I been playing with the Caltracs and the QA1's and i can get the rear end to sit pretty high and the 10" wheels I test fitted off another car seem to fit OK. so I may go for the 'big ass' effect and take advantage of the torque on warm dry days.
|
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
CB
|
|
« Reply #11 on: September 20, 2008, 09:48:43 AM » |
|
torque is what i wanted as I am hoping for a stop sign to stop sign warrior. I think I am going to swap my 8" rear wheels for a set of 10"er's as well, I been playing with the Caltracs and the QA1's and i can get the rear end to sit pretty high and the 10" wheels I test fitted off another car seem to fit OK. so I may go for the 'big ass' effect and take advantage of the torque on warm dry days.
I like your style  CB |
|
|
|
|
Logged
|
´69 Charger / 383/4bbl 4-spd |
|
|
|
Blown70
|
|
« Reply #12 on: September 20, 2008, 11:35:06 AM » |
|
NICE
|
|
|
|
|
Logged
|
|
|
|
|
SFRT
|
|
« Reply #13 on: September 21, 2008, 07:52:26 PM » |
|
so we started at 8 am. first we fit as much as we could before putting, the headers would recquire a couple of things, as well as the serpentine pully  on the pass side the bellhousing had to be ground down a little  on the drive side I had to bang in the header a little and shave of just a hir around the 'ear' on the starter. after that clearance was fine  |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
SFRT
|
|
« Reply #14 on: September 21, 2008, 07:54:58 PM » |
|
the serpentine pulley sat right on the wp bolts  so I ground them off a bit and everything was fine  |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
SFRT
|
|
« Reply #15 on: September 21, 2008, 07:57:22 PM » |
|
apart from those small things, everything was fine, I had the engine shop index the bellhousing so that went on just fine  then the creepy part....lot of weight  |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
SFRT
|
|
« Reply #16 on: September 21, 2008, 07:59:54 PM » |
|
3 of us got it installed in about 10 minutes. guy on the left, Don, is not a car guy, just happenned to be around so he helped. Mustache guy is Bill, who owns a few killer mopars and knows EVERYTHING about these cars, he's been the Main Mechanic on this car, silly tats are me  |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
SFRT
|
|
« Reply #17 on: September 21, 2008, 08:00:40 PM » |
|
oh yes  |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
Steve P.
|
|
« Reply #18 on: September 21, 2008, 08:05:03 PM » |
|
An easy fix for the water pump bolts is to remove the washers. I had to do the same thing with my 440 source goods... Looking great...  |
|
|
|
|
Logged
|
Steve P.
Holiday, Florida
|
|
|
|
SFRT
|
|
« Reply #19 on: September 21, 2008, 08:14:31 PM » |
|
yeah , I should done that but I have 'vibration paranoia' and alys locktite and locknwasher everything. Its a habit from working on Harleys. Bill's Superbee:  |
|
|
|
|
Logged
|
My other ride is your Mother
|
|
|
|
