News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

How to do a 4 speed swap...with pictures!

Started by AKcharger, October 09, 2012, 06:26:09 PM

Previous topic - Next topic

AKcharger

Quote from: rockosocko on September 07, 2020, 03:48:30 AM
DANGIT.. Gotta read all over again. Couldn't get past Ms. Bouncy  :icon_smile_big:

... Did any of you guys use a dial indicator to align your bell housing?  I have two 'stock' dual bolt pattern bells.
I've heard of input shafts, pilots getting eaten up by not doing this.

Thanks

Sorry about bouncy lady...not really  :icon_smile_big:

Yes I failed to take a photo of that step but yes have to use a dial guage...the service manual has good instructions on it. you will then use off-set dowels to make sure it's alighned properly.  and you are correct, that is why so many clutches and stuff were eatten up when were were kids and just threw em in

ACUDANUT

I bet the current price to do a factory 4-speed is north of 5k Now. Not counting labor.