68 Charger Rallye dash and gauges into 69 Coronet

[rp23g7]

So, I have a chance to pick up a Rallye dash and guages out of a 68 Charger parts car.  Will the Frame and cluster, fit in a 69 Coronet?

[Brock Lee]

Yeah, the frame will go in. That whole firewall/cowl area is universal on the same era B bodies.

[rp23g7]

Thanks Brock

[Troy]

The wiring harness is different due to the Rally gauges. As mentioned, it will physically fit.

Troy

[tan top]

think your going to have to weld /or rivit  on  metal tabs !!  on the non rallye  coronet dash , for mounting the rallye gauge cluster  

[Brock Lee]

That is why you swap the whole dash. But then I guess you run into that whole tampering with the VIN thing.

[Troy]

think your going to have to weld /or rivit  on  metal tabs !!  on the non rallye  coronet dash , for mounting the rallye gauge cluster 

I think of the dash as the entire assembly (frame, pads, gauges, etc.) so that would work. Fitting just a gauge cluster into a non-rally dash would be pretty hard.

Troy

[tan top]

think your going to have to weld /or rivit  on  metal tabs !!  on the non rallye  coronet dash , for mounting the rallye gauge cluster  

I think of the dash as the entire assembly (frame, pads, gauges, etc.) so that would work. Fitting just a gauge cluster into a non-rally dash would be pretty hard.

Troy

yeah your right ! just reread the question    sorry guys     going to wait fot my bus     

[rp23g7]

I forgot to add that i am getting the frame, insert and the wiring harness, sorry guys.  I can probably take my VIN and rivit it back on if need be.