What is the gage thickness of the bumpers on a 1968 Charger. AMD advertises theirs as 13 gage. Is that comparable to stock thickness, thinner or thicker?
I'd get a quarter they're thinner.
13 gage is somewhere between .090 and .094. Using calipers, I tried to to measure mine. They don't have sharp edges (thee is a small burr) and it is hard to find a spot that doesn't approach a curve. The thinnest measurement I did was about .112. If the burrs and curvatures weren't there, .112 is approximately 12 gage.
stock bumpers a definitely thinner and lighter, at least on my 68
by the way both AMD front and rear bumpers fit great and are of superior quality
Thank you,
I ordered them.