Print Page - First gen seat buns

Title: First gen seat buns
Post by: Ghoste on September 09, 2005, 01:35:42 PM

Does anyone know if the seat buns for the rear buckets in a 66-67 are the same as the front ones? And if they are not, can they be modified to work?

Title: Re: First gen seat buns
Post by: CornDogsCharger on September 19, 2005, 09:50:45 PM

I don't think they are. The back seats are much smaller than the fronts. You probably could modify and front seat buns to fit the back... but not the backs to fit the front..... if that makes sense....whew, tounge twister

Justin
"CornDog"

Title: Re: First gen seat buns
Post by: Ghoste on September 20, 2005, 03:50:15 AM

Thanks Justin. I had pretty much come to that conclusion from communicating with someother folks too. I'm wondering now if there is any way to make them from a large enough piece of high density foam.

DodgeCharger.com Forum

Mopar Garage => Interior => Topic started by: Ghoste on September 09, 2005, 01:35:42 PM