The guys at the shop are wondering if the area behind this trim was filled with sealer at the factory? There was glob of something stuck on the back but they aren't 100% sure. I'm assuming something was there to keep water out? Thanks Matt
Don't take it as gospel but I was told that nothing was there from the factory. Water just ran through the hole and drained out at the bottom of the car...
Quote from: csx4590 on March 24, 2021, 10:19:44 AM
Don't take it as gospel but I was told that nothing was there from the factory. Water just ran through the hole and drained out at the bottom of the car...
Holy hell lol
i have seen some guys paint the back of the moldings to match body colour and use butyl tape to help seal the gap
Quote from: csx4590 on March 24, 2021, 10:19:44 AM
Don't take it as gospel but I was told that nothing was there from the factory. Water just ran through the hole and drained out at the bottom of the car...
Correct as far as I'm aware.
Yup, that's what we figured out when putting our 70 together.
We sealed it with the red Permatex, not a real good match to EV2,
but better than staring at the black gap!!
Joe
This really blows my mind, I guess I'll see what they come up with!