- Welcome to DodgeCharger.com Forum.
News:
It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.
Recent posts
#1
Car Guys Discussion / Re: 383 shortage in 1968
Last post by hemigeno - Today at 11:08:16 PMQuote from: 69hemibeep on Today at 09:12:52 PMWonder if it is even a 440
... or if the block's cast date is long after the SPD...
#2
Charger Discussion / Re: My new patina'd RR1 burgun...
Last post by 70B5Cuda - Today at 09:42:56 PMIt's kind of hard to see in these first two pictures, but the tunnel had to be clearanced to get the transmission up into the tunnel where it needed to be.
The torsion bar crossmember lips were trimmed down in the tunnel and a plate was welded in.
The torsion bar crossmember lips were trimmed down in the tunnel and a plate was welded in.
#3
Charger Discussion / Re: My new patina'd RR1 burgun...
Last post by 70B5Cuda - Today at 09:32:05 PMCatching up a little bit...
Got the Charger up on the lift to mock up the drivetrain...
Mounted the cast manifolds first, which are from a 6.4L Jeep Cherokee SRT8. These headers are cheap and they actually came factory on Jeep SRT8's which had 485hp, so they can handle the power and won't break easily. I paid $125 plus shipping for them. The driver's side engine mount had to be redone to accommodate the cast headers. The mount was originally straight...now it is curved.
Got the Charger up on the lift to mock up the drivetrain...
Mounted the cast manifolds first, which are from a 6.4L Jeep Cherokee SRT8. These headers are cheap and they actually came factory on Jeep SRT8's which had 485hp, so they can handle the power and won't break easily. I paid $125 plus shipping for them. The driver's side engine mount had to be redone to accommodate the cast headers. The mount was originally straight...now it is curved.
#4
Car Guys Discussion / Re: 383 shortage in 1968
Last post by 69hemibeep - Today at 09:12:52 PMWonder if it is even a 440
#5
Aero Cars / Re: Superbird sale
Last post by Mytur Binsdirti - Today at 04:31:53 PMQuote from: hemi68charger on September 25, 2023, 08:41:23 AMQuote from: Mytur Binsdirti on September 25, 2023, 04:52:53 AMI suspect a certain white Hemi Superbird will be for sale soon.
Nope.. in a divorce right now and her lawyer is starting to play games.
Sorry to hear that.
#6
Off Topic Discussion / Re: Forums seem dead
Last post by b5blue - Today at 12:47:59 PMThere ya go trying to stir the crap again! 
#7
Off Topic Discussion / Re: Forums seem dead
Last post by Kern Dog - Today at 12:37:48 PM"Most" huh? You mean YOU and one other idiot?
While it may sometimes seem like there are only three active members, I'm sure that there are more than that.
While it may sometimes seem like there are only three active members, I'm sure that there are more than that.
#8
Car Guys Discussion / Re: 383 shortage in 1968
Last post by John_Kunkel - Today at 11:50:27 AM
Stories like that abound. #9
Car Guys Discussion / Re: 383 shortage in 1968
Last post by 70 sublime - Today at 11:29:19 AMAsk the seller if he bought the car new ??
Sounds like a story that has been told to the next owner from the last owner several times for several owners till they think it is true
Sounds like a story that has been told to the next owner from the last owner several times for several owners till they think it is true
#10
Paint, Body & Trim / Re: painting after vinyl top r...
Last post by armor64 - Today at 11:20:23 AMI have only seen a few 2-tone Mopars in person at the Carlisle show, and they were almost all gloss/gloss. I thought they looked good, as a flat color may make it look too much like "faking" the vinyl top, unless it goes further than the trim.
tough call for your preference though, hopefully it looks great with what you pick.
tough call for your preference though, hopefully it looks great with what you pick.