Text only | Text with Images

DodgeCharger.com Forum

Mopar Garage => Electric, Gauges, & Lights => Topic started by: Johnnys440Charger on July 30, 2016, 11:29:24 AM

Title: Alt Alternator Amp Gauge - Drilling out Rivets - Decals for 69 Charger Cluster
Post by: Johnnys440Charger on July 30, 2016, 11:29:24 AM
I'm putting decals on my gauges and I was wondering if there are only 2 rivets to drill out on the Alternator gauge?   I see the rivets on the Fuel Temp and Oil Gauges.  You drill them out from the back.   But I guess on the Alt gauge, you drill them out from the front?
Title: Re: Alt Alternator Amp Gauge - Drilling out Rivets - Decals for 69 Charger Cluster
Post by: A383Wing on July 30, 2016, 07:33:21 PM
I would not drill, I would use a file from the back
Title: Re: Alt Alternator Amp Gauge - Drilling out Rivets - Decals for 69 Charger Cluster
Post by: Canadian1968 on July 31, 2016, 11:26:27 AM
why are u removing rivets to put on new decals ? I did the cluster on my 68. I don't belive there is any difference in the gauges .

hardest part was trying not to damage the needles. They are so delicate !
Text only | Text with Images