Is there a out-of-car testing procedure for the gauges on a 2nd Gen Charger? Want to test the 4 gauges....
Troy
These should help.
http://1970chargerregistry.com/70messageboard/viewtopic.php?t=2055
Towards the bottom of this one.
http://1970chargerregistry.com/70messageboard/viewtopic.php?t=2018&highlight=calibration
The ammeter can be tested by just hooking up one wire to the battery positive terminal and then use another wire to very quickly complete the circuit to a ground away from the battery. It should spark and cause the needle to move.
for calibration I don't know beside a variable voltage souce... but only to know if they works, with just a 9 volts batt on gauge studs for 1 or 2 seconds, needle should moves quick to up.
except ammeter, that was already stated