Print Page - Boxing LCAs and Steering

Title: Boxing LCAs and Steering
Post by: chargedup68 on September 24, 2005, 01:55:29 PM

There was an a post on the old site regarding boxing the Lower control arms and gusseting the steering box mount. Does anyone have pictures or any recommendations for this?

Title: Re: Boxing LCAs and Steering
Post by: MTPOCKET on September 24, 2005, 08:56:59 PM

Just follow the instruction that comes with the kit and you should have no problems installing them. Here is a pic. Just add some more welds to the steering box mount to strength the factory welds.

Title: Re: Boxing LCAs and Steering
Post by: chargedup68 on September 25, 2005, 09:02:43 AM

Thanks, where did you det the kit from? I was going to make my own, but if it isn't much more expensive then I will just buy the kit.

Title: Re: Boxing LCAs and Steering
Post by: firefighter3931 on September 25, 2005, 09:45:44 AM

I did the same....got them from Magnumhp.com for $20.00

Ron

DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: chargedup68 on September 24, 2005, 01:55:29 PM