Having a brain cramp on where this goes. Labeled everything else except this.
If it's for a Charger,I've never seen one.
What does the bracket look like that goes from the center of the K frame to brace the bottom of the rad support ?
That is also what I was thinking, but I have a 70 so don't know and cannot directly check
Quote from: 70 sublime on January 05, 2018, 10:09:49 PM
What does the bracket look like that goes from the center of the K frame to brace the bottom of the rad support ?
That was my first thought. Checked my 68, not the k frame to rad support.
Under dash support :scratchchin:
Here's the K frame to radiator support from my 69. Maybe your's a support from a different model Mopar? :shruggy:
Quote from: Charger-Bodie on January 05, 2018, 09:51:18 PM
If it's for a Charger,I've never seen one.
what CB said :yesnod: was /is nothing like that on mine :scratchchin:
Looks more like the brace from under a battery tray to the body to me.
the bottom bracket for this:
(http://www.ocompras.com/images/2014/04/condensador-de-flujo-de-volver-al-futuro-01.jpg)
Of course. The atomizing brace for the flux capacitor 👍👍
:lol:
That bracket looks familiar though... :scratchchin:
being serious..
10" lenght and it seem small bolt ( 7/16" head maybe ? ), so not a heavy stuff to hold.
sounds something like a door/quarters windows stuff. But... is there something inside needing 10" lenght for a bracket ?
or maybe... under the dash?, buuut... with elongated hole to be adjusted ?
It seems also gets into a slot due the key/tab
3rd gens got a similar ( shorter thought ) bracket between headlight bracket support and frame rail end as far I recall, although using J nuts... doesn't 2nds get the same ?
Looks kinda gm to me. F body maybe
AC compressor mount? Just a shot in the dark, I have no idea either.
Quote from: Alaskan_TA on January 06, 2018, 12:58:30 PM
Looks more like the brace from under a battery tray to the body to me.
The battery tray brace has a twist bend at one end.
NHCharger,
how long has the car been apart?
I posted the question on fb on the b body forums, hopefully someone will come up with an answer for ya. (also posted that same picture) hope you dont mind.
What year car is it on? 68?
some are saying front fender bracket. does that sound right?
others say "Looks like brace from core support to front valance pan".
what about this brace under the sway bar? looks like it to me...
Quote from: Harper on January 15, 2018, 11:12:06 PM
some are saying front fender bracket. does that sound right?
others say "Looks like brace from core support to front valance pan".
I don't think it's the k member to lower radiator brace. I checked my 68 , it has the same brace that green69 posted. I bought the car sight unseen from a board member. He sent a lot of pics but failed to mention that the lower radiator support had been cut off ::) ::) . So obviously the brace/bracket wasn't there.
Could be a brace for the front fender area but this was a Daytona clone so the front is all changed.
This looks exactly like it but ss
Quote from: Harper on January 15, 2018, 11:30:17 PM
what about this brace under the sway bar? looks like it to me...
I don't think that brace gets a nut attached, since it seems bolts attach straight to K member provisions
:popcrn: :popcrn: :popcrn:
so it looks like this stainless steel one is a fender bracket, not k member to core support. i really don't know i am just trying to help. it looks like it to me. :shruggy: