Hi All!
I have Code P06dd on my 2012 Durango 3.6L. I've read too many thoughts on the open web and was hoping someone here had sound advice.
This began many months ago, it sometimes briefly goes away, when it comes back it goes into limp home mode, then may or may not drive ok for a while.
It has a Mopar Filter, fresh correct weight oil, replaced the pressure sender with a new Mopar piece, changed the oil cooler/filter housing to the aluminum Dorman updated style.
Also - Oil pressure numbers look good for high and low, and never saw oil pressure light come on
It's AWD so the pump/solenoid is a big job that I don't want to do it if problem persists.
Also some advise an ECM reflash, haven't tried that yet, thoughts?
THANKS!
And now the rest of the story - changed the pump, used a Melling unit since couldn't find a Mopar OEM in stock anywhere. About a thousand miles and so far so good.
For the pump - for some reason O'Reilly Auto Parts was a lot cheaper than everyone else for the same part.