News:

It appears that the upgrade forces a login and many, many of you have forgotten your passwords and didn't set up any reminders. Contact me directly through helpmelogin@dodgecharger.com and I'll help sort it out.

Main Menu

JAAK's 1969 R/T

Started by jaak, March 07, 2011, 12:20:28 AM

Previous topic - Next topic

Patronus

Probably going red...or black.. or chrome..
I never knew where those round foam washers went from the paint gasket kit... until now. Tnx  :2thumbs:
That green looks REAL nice! Sometimes I wish I had picked a color, maybe when I wing it.
'73 Cuda 340 5spd RMS
'69 Charger 383 "Luci"
'08 CRF 450r
'12.5 450SX FE

jaak

Been a while since I've updated, after installing stripe and bumper, I installed the exhaust system I bought off eBay. It was a reproduction system and fit pretty good, the left tail pipe give me a little problems, but I got it in. I installed repro exhaust tips from eBay seller stripeclassics (nice tips) and I bought some new tip hangers from member Back in Black (thanks for the deal!). Here is a pic of the rear of the car with exhaust/tips installed. Also note in the pic the license plate, in Alabama now you can run year of manufacture plates, a friend found this 69 Alabama tag.


I also undercoated the rear wheel wells and installed the wheel lip mouldings....


Installed turn signal delete plates....


Installed hood pad, core and cowl seals...


BIG MOMENT, got the grille installed. The pic in my signature was taken not long after paint, just the grill held in with a couple of bolts. Its now fully installed with all the headlamp parts and hardware....



Scored a very nice used antenna on eBay for 32 bucks....


Fender pentastar....


Had a friend that owed me a favor (put a waterpump and brakes on his van) So he bought me some 3M adhesive and come over to give me a hand installing the vinyl top. The hardest part was the upper-inner corners of the sail panel, after a little cussing it was all good....





....then onto the headliner, I cleaned up and reused the original sunvisors, after a little elbow grease they turned out like new...




With the help of my lovely assistant (wife....thanks Alesha!) we installed the backglass and trim....


Then a couple of days later (again with wife's assistance) we install the front windshield....


Here is how the Charger looks right now, I polished up all my original trim, it was in good shape to be original but there is a piece or two I may replace later on down the road. About all that is left bodywise is buy the front bumper, install it and the front valance. Buy rocker moulding clips (have new repro rocker mouldings), and buy/install side marker lenses. Other than the headliner, I got to buy and install most of the interior.


Jason

Charger-Bodie

You are getting close! Looks great!
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

terrible one

Looks AWESOME buddy  :2thumbs: I'll bet you're excited. I dig the 1969 Bama plate. Great job installing the vinyl top and headliner too  :2thumbs:

elanmars

Looks pretty awesome!!! good job.
1969 Dodge Charger, pseudo General Lee., 1973 ratty Dodge Charger.

check out my photography: http://www.tomasraul.com
instagram: tomasraul
facebook: www.facebook.com/tomasraulphotography

FlatbackFanatic

Flatback Fanatic, Kurt  , MN

moparstuart

GO SELL CRAZY SOMEWHERE ELSE WE ARE ALL STOCKED UP HERE

69bronzeT5

Wow Jason, looking great!!!
Feature Editor for Mopar Connection Magazine
http://moparconnectionmagazine.com/



1969 Charger: T5 Copper 383 Automatic
1970 Challenger R/T: FC7 Plum Crazy 440 Automatic
1970 GTO: Black 400 Ram Air III 4-Speed
1971 Charger Super Bee: GY3 Citron Yella 440 4-Speed
1972 Charger: FE5 Red 360 Automatic
1973 Charger Rallye: FY1 Top Banana 440 Automatic
1973 Plymouth Road Runner: FE5 Red 440 Automatic
1973 Plymouth Duster: FC7 Plum Crazy 318 Automatic

rrob

Fantastic job Jason!  :2thumbs:
69 charger, 440, automatic

tan top

 :2thumbs: :2thumbs: :2thumbs: nice work going on  !!  :drool5:
Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html

69 OUR/TEA

Looks real nice Jason!!! :2thumbs: I have to say,I'm not really a big fan of color changes to one that was not offered in that year,but that does look really,really good.
On another note,noticed in your pic with the windshield in that your defroster vents are'nt in,are you going to be able to get them in now with the windshield that close right above them??????I've never done them that way,always put them in before the windshield went in.

jaak

Quote from: 69 OUR/TEA on May 31, 2011, 02:02:48 PM

On another note,noticed in your pic with the windshield in that your defroster vents are'nt in,are you going to be able to get them in now with the windshield that close right above them??????I've never done them that way,always put them in before the windshield went in.

Oops, I didn't think about that  :-\ , I hope they don't give me too much trouble.

Thanks everyone for the comments,
Jason

69charger2002

man that car has come a long way! you should be proud, it looks awesome!!
i live in CHARGERLAND.. visitors welcome. 166 total, 7 still around      

http://charger01foster.tripod.com/

CDN72SE

Very nice job and must feel good to have done the vinyl roof at home.  :2thumbs:
1972 Charger SE

jaak

Quote from: terrible one on May 28, 2011, 12:14:36 AM
Looks AWESOME buddy  :2thumbs: I'll bet you're excited. I dig the 1969 Bama plate. Great job installing the vinyl top and headliner too  :2thumbs:

Thanks Jackson!
About the '69 plate, another thing pretty cool to me is.... On Alabama plates the first digits indicate what county the tag is issued, my plate begins with a 41, that's Lauderdale County, which is the county I live in. All my (newer tags) on my other vehicles start with 41 also.

Jason

jaak

Quote from: jaak on May 31, 2011, 02:08:06 PM
Quote from: 69 OUR/TEA on May 31, 2011, 02:02:48 PM

On another note,noticed in your pic with the windshield in that your defroster vents are'nt in,are you going to be able to get them in now with the windshield that close right above them??????I've never done them that way,always put them in before the windshield went in.

Oops, I didn't think about that  :-\ , I hope they don't give me too much trouble.

Thanks everyone for the comments,
Jason

It's a tight fit, but they will go in with the windshield in.

Jason

69 OUR/TEA

Just figured I'd mention it,looks tight and as I said,I had always put them in with windshield out.Good going!!!!!

skip68

Jason, your green charger is one of my favorite looking cars on this site.  That green is just awesome.  Jackson's is another with the white Dodge on .each side.   :2thumbs:  
skip68, A.K.A. Chuck \ 68 Charger 440 auto\ 67 Camaro RS (no 440)       FRANKS & BEANS !!!


bill440rt

Lookin' good, Jason!  :2thumbs:  :scope:

I like the green, too!!
"Strive for perfection in everything. Take the best that exists and make it better. If it doesn't exist, create it. Accept nothing nearly right or good enough." Sir Henry Rolls Royce

bmd


jaak

In another thread I mentioned I sold the "73 to finally finish this 69 I have been working on and off on for years.

I ordered a lot of stuff (I'm sure I missed a thing or two) here's what I have ordered and from whom....


CLASSIC INDUSTRIES
-Seat/Trunk Divider
-Grant Steering Wheel Adapter
-Package Tray
-Bucket Seat Foam
-Seat Belts (Aftermarket)
-Trunk Mat
-Glove Box Liner
-Interior Rear Glass Trim

SUMMIT
-Grant Walnut Tuff Wheel
-Mopar Performance Air Cleaner
-Ignition Coil
-Chrome Lug Nuts (20)

521RESTORATIONS
-Front Bumper

INDIVIDUAL ORDERS OFF OF EBAY
-Carpet
-Door Panels
-ABS Plastic Seat Backs
-Door Jamb Windlace
-Rocker Moulding Clips
-15x7, ION625 Wheels (4)
-Decals Hood Indentions
-Front E-brake Cable
-Misc. Hardware From Fastener Store

Well, stuff has started showing up, today my wheels came in. They are ION 625, 15x7, I really liked these wheels, sort of has a Magnum look to them, but look more current. I went to the local tire shop, and had 235/60-15 BFG's mounted on them. Had to throw a pair on and snap some pics. Totally changes the 'attitude' of the car.






Jason


Charger-Bodie

I like thos wheels myself !
68 Charger R/t white with black v/t and red tailstripe. 440 4 speed ,black interior
68 383 auto with a/c and power windows. Now 440 4 speed jj1 gold black interior .
My Charger is a hybrid car, it burns gas and rubber............

greenpigs

I like the rims also, kinda has the look that the 67 Shelby had with the Keesly-sic rims was it?

1969 Charger RT


Living Chevy free

jaak

Installed the bumper brackets, AMD front bumper, front valance and front turn signals...




Installed the decals on the hood scallops...



Took a new pic of the engine with new air cleaner. I bought the MP to match my valve covers...



Stay tuned.....

Jason

tan top

Feel free to post any relevant picture you think we all might like to see in the threads below!

Charger Stuff 
http://www.dodgecharger.com/forum/index.php/topic,86777.0.html
Chargers in the background where you least expect them 
http://www.dodgecharger.com/forum/index.php/topic,97261.0.html
C500 & Daytonas & Superbirds
http://www.dodgecharger.com/forum/index.php/topic,95432.0.html
Interesting pictures & Stuff 
http://www.dodgecharger.com/forum/index.php/topic,109484.925.html
Old Dodge dealer photos wanted
 http://www.dodgecharger.com/forum/index.php/topic,120850.0.html