Hi all! Want to make my fuel line "hard plumbed". Anyone make a pump that accepts fittings? Engine is a 70 - 440 w/an aftermarket 6 pak. Thanks
Just saw this one (in one of my posts :brickwall:). Any place better than the other to get this?
http://www.dodgecharger.com/forum/index.php/topic,133774.0.html
it's just a carter HV pump. you can get them any where
I think Carter PN M6903. I bought one like that with a fitting from NPT to the flare fitting with the appropriate angle (37.5 vs 45 degree). Used Al tubing and a tubing bender to make my own. I had some funny thing with the NPT adapter and the pump. I don't think it was a taper thread vs A/N issue, but more like the adapter was too long to thread properly. I had to clean the threads and tap again on the pump side. The pump itself can be disassembled for cleaning, so is nice in that respect.
6903 will work @ 5-6LBS pressure.