Print Page - Anyone running trickflow 270s on a b block? What intake are you using?

Title: Anyone running trickflow 270s on a b block? What intake are you using?
Post by: chapel40 on January 08, 2018, 11:53:21 AM

No where can I find what intake can be used except one from indy heads. Guess they have max wedge style ports which I don't quite understand exactly what size that is. What about an Indy mod-man intake?

Title: Re: Anyone running trickflow 270s on a b block? What intake are you using?
Post by: c00nhunterjoe on January 09, 2018, 07:28:54 PM

If they are max wedge, then you are limited yes. The maxxie indy intakes are tall so check hood clearance. The modman is lower, but i cant recall the exact height.

Title: Re: Anyone running trickflow 270s on a b block? What intake are you using?
Post by: chapel40 on January 09, 2018, 09:35:25 PM

Thanks,
Probably just go with the cnc trickflow 240s huh. Can you install aftermarket AC on a edelbrock rpm intake?

Title: Re: Anyone running trickflow 270s on a b block? What intake are you using?
Post by: garner7555 on January 10, 2018, 07:35:09 AM

Quote from: chapel40 on January 09, 2018, 09:35:25 PM
Thanks,
Probably just go with the cnc trickflow 240s huh. Can you install aftermarket AC on a edelbrock rpm intake?

I have a Vintage Air setup with a RPM intake. It works fine. :2thumbs:

Title: Re: Anyone running trickflow 270s on a b block? What intake are you using?
Post by: cdr on January 10, 2018, 11:24:25 AM

I have ac with Indy SP intake.

DodgeCharger.com Forum

Mopar Garage => Performance Corner => Topic started by: chapel40 on January 08, 2018, 11:53:21 AM