I'm in the process of tearing an A/C heater box from a 1968 B Body. My question is how do you remove the AC evaporator core from the metal box? I was able to figure out the heater core removal part of it but having troubles with this evaporator. I do not want to cause any damage by error by trial. I've searched the internet on "how to-s" most of my luck resulted in the heater box only applications or the ones I did find on the A/C heater boxes did not detail the A/C evaporator core removal. I know it must come out because they sell new ones. Anyone on here done this before? Pics?
Thanks VC :cheers: :cheers: :cheers:
Pics....
make sure you get ALL the little hex head screws out, the drain tube outer extensions have to come off, it will come out.
the core is attached to a tray that slides into the outer box.
(http://i1198.photobucket.com/albums/aa453/cdrmorsports/Facebook/1968%20PROJECT%20CHARGER%20part%20ONE/1077878_548207528571294_550365242_o.jpg)
(http://i1198.photobucket.com/albums/aa453/cdrmorsports/Facebook/1968%20PROJECT%20CHARGER%20part%20ONE/1071600_548207411904639_1455697470_o.jpg)
(http://i1198.photobucket.com/albums/aa453/cdrmorsports/Facebook/1968%20PROJECT%20CHARGER%20part%20ONE/1075600_548207338571313_1172715076_o.jpg)
Quote from: cdr on January 21, 2017, 04:09:34 PM
make sure you get ALL the little hex head screws out, the drain tube outer extensions have to come off, it will come out.
Thanks CDR. :2thumbs: :2thumbs:
Are the drain tube extensions a slip over connection? Do you yank them outward for removal?
Thanks :cheers:
they pull straight off, they can get corroded & my need to spray them with penetrating lube. they are soft,work them slowly .
Thanks again CDR. I was able to successfully remove the A/C evaporator with your advice. The drain tube extensions were a bit challenging, but with patience they came off. I believe that there were a total of seven 1/4" hex head screws that secure the evaporator tray to the outer box.
:cheers:
:2thumbs: