DodgeCharger.com Forum

Mopar Garage => Interior => Topic started by: mister bungle on December 21, 2005, 02:01:25 AM

Title: C-pillar
Post by: mister bungle on December 21, 2005, 02:01:25 AM
For a 69 Charger. I am in progress of putting my headliner in. I have problems with attaching the headliner on the C pillar. Only on the rear window are hooks to attach the headliner. How can you glue that in the exact place on the horizontal plate behind the seat? Where first to attach and how? WHAT'S THE TRICK to do it right, without wrinkles?
Title: Re: C-pillar
Post by: hemi68charger on December 21, 2005, 01:24:34 PM
You have to begin in the rear middle and work your way forward...  Remember to get the vinyl nice and hot.. I usually will lay the headliner on the roof of the car and let it sit out in the Sun...... You also need to take the side window rubber seal channel out to do it properly.......... The front of the roof should be the last place you are..........

Troy
Title: Re: C-pillar
Post by: mister bungle on December 22, 2005, 04:58:11 AM
Thanx for the answer, the car is completly naked (!) The headliner is nicely attached and glued, only the C pillar is hanging there, but i don't know how to attach the headliner under the package tray, cause there are no gripper teeth to hold it while the glue is drying... How did they do that???