DodgeCharger.com Forum

Mopar Garage => Interior => Topic started by: doctor4766 on July 29, 2016, 03:11:40 AM

Title: Non A/C heater box cable connections.
Post by: doctor4766 on July 29, 2016, 03:11:40 AM
Hi guys.
I have been asked by a customer who is restoring a non A/C 69 Charger how the heater cables are set up, as he's had the box restored but can't remember how the control cables are fitted. Had a look but mine being an A/C car is totally different.
Could someone explain or knock up a simple diagram on what cable goes to where from the control unit?
His controls are like this one in the link.
http://www.performancecargraphics.com/images/Dash_Stuff/Restoration/AC_Heat_Radio/B-body_Heat_69-70.jpg
Thanks in advance.
Title: Re: Non A/C heater box cable connections.
Post by: BLK 68 R/T on July 29, 2016, 08:46:13 AM
http://dodgecharger.com/forum/index.php?topic=73324.0
Title: Re: Non A/C heater box cable connections.
Post by: doctor4766 on July 29, 2016, 06:53:46 PM
Thank you sir

One question though.
How does one cable operate both sides of the fresh air vent?
I'm no longer with the car, but I'm sure each side has its own flap control right?
Title: Re: Non A/C heater box cable connections.
Post by: Alaskan_TA on July 29, 2016, 07:24:36 PM
The driver side vent is not shown at that link, it has it's own cable.
Title: Re: Non A/C heater box cable connections.
Post by: doctor4766 on July 29, 2016, 07:47:20 PM
Oh yeah, of course. The small lever below the dash