Year one has two different ones ,standard and premium. What's the difference? I had some from somewhere but, they were flat and I had no idea/way to put them on. I am talking about the rear inner ones here mostly. Would like the kind with a lip.
not sure but i had the premium catwhiskers from them , & the inners come with the stainless trim also attached
Were your inners flat or did they have the lip (wiper) ?
Quote from: poppa on June 10, 2011, 08:15:14 PM
Were your inners flat or did they have the lip (wiper) ?
hmmm think i'm getting mixed up :-\ but the inner only has a bush type wiskas , hence the name ! the outer has a rubber edge that should wipe or sit very close on the glass :scratchchin: :popcrn:
How did they attach to the inner metal piece?
they don't thet are attached to the upper quarter inner trim pad , with industrial fired staples , , just use tiny self tapping screws , with a little sealer dopped on the back incase the screw loosens over time :Twocents:
Now that you mention it I remember the staples. I would be worried the screws would hit the glass>
Black rivets
Small screws work fine, that's how mine were when I got the car. They don't hit the glass.
I would go with TOP CATWISKERS brand
( I got REALLY dissapointed with YR1 pieces )
Quote from: poppa on June 11, 2011, 03:22:03 PM
Now that you mention it I remember the staples. I would be worried the screws would hit the glass>
no
on the inner , the whiskers only just or nearly touch the glass if the glass has been adjusted correctly :yesnod:
Quote from: Patronus on June 11, 2011, 03:29:37 PM
Black rivets
thats a good idea ! :coolgleamA: :2thumbs: never thought of that :slap:
Quote from: Nacho-RT74 on June 12, 2011, 07:49:04 AM
I would go with TOP CATWISKERS brand
( I got REALLY dissapointed with YR1 pieces )
mine were the real top cat whiskers brand ! from year one , :yesnod:
never changed the rear because of the staple deal! & my rear inner ones were pretty much like new anyway