About to install the tail lights. The 3/16 dia. Studs protrude about 3/4 inch into the trunk.
#10-24 thread I believe.
What does the retaining nuts look like? Simple nut or something more complex??
it is a nut with built in washer , call Tom @ R/T specialties he has what you need
any of these work??
http://www.megapartsusa.com/proddetail.asp?prod=114-TLF901
Thank You
It appears that I Have a bag full of those formed nut/washers.
:2thumbs:
What ive seen on every 68-69 Charger Ive looked at while doing 2 different cars
10-24 machine thread nut, .75 Diameter washer , Yellow zinc di-chromate plated
(https://www.amkproducts.com/wp-content/uploads/product_pics/LHE.jpg)
Quote from: gtx6970 on June 19, 2019, 05:22:34 PM
What ive seen on every 68-69 Charger Ive looked at while doing 2 different cars
10-24 machine thread nut, .75 Diameter washer , Yellow zinc di-chromate plated
(https://www.amkproducts.com/wp-content/uploads/product_pics/LHE.jpg)
Yep thats whats on my car in the picture I posted :)
Thank you.
That means that the nuts I have are not right.
I will also have to search through all the plastic bags I have in many hiding places.
I found 9 of them. They look 50 years old. Have to see if I can clean them some.