Hey Gang..
My C500 is getting heavy into the body repair portion of the project... I was hoping to gain some lessons-learned in terms of the sequence of installation when it comes to reconstructing the rear valance area. I have an NOS rear valance that will be installed along with AMD rear quarter lower patches and corners.. Which parts go in 1st, 2nd, etc... There will be a new crossmember and complete trunk pan along with the quarter extensions/trunk-drops...
Thanks in advance...
Troy
trunk pan should go in first before the lower valance....it won't fit through the trunk lid opening
Bryan
Quote from: A383Wing on October 17, 2019, 07:06:12 PM
trunk pan should go in first before the lower valance....it won't fit through the trunk lid opening
Bryan
Hey Bryan.. Should have been more clear.. Sorry. The trunk first is a given. I was wondering about the installation relationship between the lower quarters, end caps and rear valance..
Quote from: hemi68charger on October 17, 2019, 08:43:57 PM
Quote from: A383Wing on October 17, 2019, 07:06:12 PM
trunk pan should go in first before the lower valance....it won't fit through the trunk lid opening
Bryan
Hey Bryan.. Should have been more clear.. Sorry. The trunk first is a given. I was wondering about the installation relationship between the lower quarters, end caps and rear valance..
Lower 1/4s, Caps & then the valance