DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: my69rt on April 29, 2011, 09:30:26 PM

Title: Sail panel emblem installation
Post by: my69rt on April 29, 2011, 09:30:26 PM
I'm finally getting around to doing some finishing work on ole' green and need some tips so I don't screw it up.  I just picked up a Charger emblem for the sail panel and do not know how to install it correctly.  The studs on the new emblem line up well with the exsisting holes and it came with some plastic retainers.  Is there any adheasive, special tools, access from the interior required to stick this thing on the car?

Thanks,

spence
Title: Re: Sail panel emblem installation
Post by: gasoline_24 on April 29, 2011, 09:32:58 PM
You have to remove the headliner to install the emblems.
Title: Re: Sail panel emblem installation
Post by: terrible one on April 29, 2011, 09:37:26 PM
Quote from: gasoline_24 on April 29, 2011, 09:32:58 PM
You have to remove the headliner to install the emblems.

Yep, there are also pieces of cardboard like material that re in the way as well. Not sure what retainers you got but they were originally attached using "speed nuts" that cut their own threads into the post. Same thing used on other emblems and trim on the car.
Title: Re: Sail panel emblem installation
Post by: my69rt on April 30, 2011, 05:56:24 AM
Thanks,

Not what I wanted to hear but that's what I expected.

spence
Title: Re: Sail panel emblem installation
Post by: Troy on April 30, 2011, 09:54:33 AM
Nah, you can reach them from inside the trunk - if you aren't an NFL linebacker or have huge hands.

Troy
Title: Re: Sail panel emblem installation
Post by: twodko on April 30, 2011, 10:45:36 AM
"You have to remove the headliner to install the emblems."

Only on the sail panels. Easy out, easy back in. No worries.
Title: Re: Sail panel emblem installation
Post by: Silver R/T on April 30, 2011, 12:39:34 PM
You could always glue them on if you don't want to mess with headliner or getting into the trunk
Title: Re: Sail panel emblem installation
Post by: PA Dodger on May 01, 2011, 08:56:51 PM
I used these to install mine when I didn't want to go through the headliner hassle. They worked great and the emblem sat flush on the vinyl top. Try looking at a body shop supply house.



http://cgi.ebay.com/ebaymotors/Dodge-Plymouth-Chrysler-emblem-nuts-100-pcs-clips-/130454306112?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e5faebd40


Title: Re: Sail panel emblem installation
Post by: Just 6T9 CHGR on May 02, 2011, 05:05:41 PM
Actually i think those pink things on the emblems are the retainers & yes you can pretty much reach both pegs from inside the trunk
Title: Re: Sail panel emblem installation
Post by: AKcharger on May 06, 2011, 01:21:11 AM
Ya' know what...come to think of it that's how I got the the emblems on my '70
Title: Re: Sail panel emblem installation
Post by: 70 Charger RT on May 16, 2011, 01:53:48 PM
As PA dodger says above, the barrel clips work great.  The only disadvantage being that someone can pop off your emblems with a screw driver when you're not looking. 
Title: Re: Sail panel emblem installation
Post by: Al on March 09, 2017, 10:35:58 AM
Quote from: Silver R/T on April 30, 2011, 12:39:34 PM
You could always glue them on if you don't want to mess with headliner or getting into the trunk

What glue would be recommended? I'm not too keen on removing the headliner.

Greetings
Al
Title: Re: Sail panel emblem installation
Post by: timmycharger on March 09, 2017, 11:32:18 AM
I would try to use 3M super trim adhesive.  I used that for the weatherstripping/seals on my car as well as the R/T emblem on my grille, worked great.
Title: Re: Sail panel emblem installation
Post by: Al on March 09, 2017, 11:53:50 AM
Quote from: timmycharger on March 09, 2017, 11:32:18 AM
I would try to use 3M super trim adhesive.  I used that for the weatherstripping/seals on my car as well as the R/T emblem on my grille, worked great.

I suppose in tube and not aerosol ?
Title: Re: Sail panel emblem installation
Post by: timmycharger on March 09, 2017, 11:57:28 AM
Correct
Title: Re: Sail panel emblem installation
Post by: Al on March 09, 2017, 12:40:45 PM
I can only find 3M super weatherstrip adhesive in tube, super trim adhesive seems to come only in aerosol  :scratchchin:
Title: Re: Sail panel emblem installation
Post by: timmycharger on March 09, 2017, 12:50:45 PM
This is what Use:


https://www.amazon.com/3M-08008-Black-Weatherstrip-Adhesive/dp/B00063X38M
Title: Re: Sail panel emblem installation
Post by: Al on March 09, 2017, 01:10:43 PM
Quote from: timmycharger on March 09, 2017, 12:50:45 PM
This is what Use:


https://www.amazon.com/3M-08008-Black-Weatherstrip-Adhesive/dp/B00063X38M

Thank you very much for your help. I appreciate !

Greets
Al