DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: 1badbee on May 12, 2008, 12:13:07 PM

Title: Help with stripe placement for my BEE
Post by: 1badbee on May 12, 2008, 12:13:07 PM
Hello everyone,

Im needing help with the stripe placement for my 70 BEE..Does anyone out there have the correct placement for this?? How far from the quarter do I come off??
How high is the bottom of the BEE circle off the marker light??
Please if anyone has some OLD factory lititure, or some GREAT pics that would be GREAT!!!

Thank you DODGE CHARGER!!!
Title: Re: Help with stripe placement for my BEE
Post by: 71_Charger_R/T on May 12, 2008, 01:20:05 PM
Is it the "C" stripe or the "Rump" stripe?
Title: Re: Help with stripe placement for my BEE
Post by: 1badbee on May 13, 2008, 12:05:58 PM
Im SO SORRY its the rump stripe
Title: Re: Help with stripe placement for my BEE
Post by: 375instroke on May 15, 2008, 02:52:02 PM
They were all over the place, but ideally, the bee is centered on the body line, the marker is centered in the stripe, and the rear distance up the quarter and around the trunk is even.  Lots of original stripes are a bit forward of centered on the marker light, but I'm sure that was just lazy installation.  My description looks best.  Read this: Superbee stripe location (http://board.moparts.org/ubbthreads/showflat.php?Cat=0&Board=A12&Number=4399618&Searchpage=1&Main=4397033&Words=+375inStroke&topic=&Search=true#Post4399618)
Title: Re: Help with stripe placement for my BEE
Post by: 71_Charger_R/T on May 16, 2008, 03:11:22 PM
I have the dimensions off my old '69 original factory placement that I wrote down about 20 years ago. I can find them if you think it would help.
Title: Re: Help with stripe placement for my BEE
Post by: 375instroke on May 17, 2008, 04:13:09 PM
I've seen original stripes all over the place.  I stand by my previous post.  Are the paint runs in my engine compartment, door jambs, and trunk on the engineering drawing?  I found a pic of my '69 Bee and the stripe (original paint car) is a bit forward of centered on the side marker.  I can't believe that's what they were trying for.
Title: Re: Help with stripe placement for my BEE
Post by: 1badbee on May 17, 2008, 07:35:46 PM
Thanks with ALL your help everyone!!!
I will be getting pics of her soon to ya!!!

Thanks DODGE CHARGER!!!
Title: Re: Help with stripe placement for my BEE
Post by: 375instroke on May 20, 2008, 08:47:04 AM
Use the wet method when you install it.  It lets you move it around and get all the air out.  Don't forget to paint the side light bezels stripe color.
Title: Re: Help with stripe placement for my BEE
Post by: 1badbee on May 20, 2008, 12:12:11 PM
375instroke ,

Quote from: 375instroke on May 20, 2008, 08:47:04 AMDon't forget to paint the side light bezels stripe color.
The 70 model BEES do not get their marker lights painted, just the 69 models do.. thank you

http://www.mrnorms.com/cars/images/70Superbee.jpg
http://www.classiccarart.us/carsDODGE70SuperBee2.jpg
http://www.midohiomopars.org/Members%20rides/Tom%20&%20Sharon's%20Bee.jpg
Title: Re: Help with stripe placement for my BEE
Post by: 375instroke on May 20, 2008, 07:23:10 PM
Oops.  Forgot they were chrome.  Never owned newer than '69.