On a 2nd gen each quarter panel has two metal stops that stop the large bracket holding the glass going up. They are mounted high on the inner panel.
Each has a rubber band around them. Mine are either worn or missing. Does anyone sell these?
Wondering same thing as I found one missing on mine last weekend.
I used several thick rubber o-rings instead of the original rubber band, then dipped the o-rings in liquid rubber (plasti-dip) to eliminate any possibility of movement. The area is concealed, so what the heck.
Cheater!
...okay I may have to do something like that.
found them this morning 5.00/ea
http://www.steelerubber.com/glass-up-stop-bumper-70-3623-62
Heater hose is another trick you can do.
Quote from: VegasCharger on March 14, 2016, 11:43:17 PM
Heater hose is another trick you can do.
If I remember correctly, I used vacuum line. Same concept but then I didn't have to deal w/the cotton fibers that a lot of heater hoses have.
For odd ball stuff like that I use "Sugru". It's like putty that hardens to rubber.
https://sugru.com
Quote from: 72Charger72 on March 02, 2016, 07:55:28 AM
found them this morning 5.00/ea
http://www.steelerubber.com/glass-up-stop-bumper-70-3623-62
Thanks for posting, need some of those as well.