Anyone have a good picture or better yet measurements on these clips? I think I drilled the bottom side one too high
bottom of the clips touch the bottom of the channel like on your top clip in the picture
have a look here
http://www.dodgecharger.com/forum/index.php/topic,31064.0.html
Hey I've seen that picture before!
OK take away is they touch bottom of channel
Quote from: AKcharger on January 06, 2021, 07:01:11 PM
Hey I've seen that picture before!
OK take away is they touch bottom of channel
yes if the glass channel is with in factory OEM specks ,
the revel moulding clips are original OEM/ repop type,
the butyl tape to stick the back glass on is stock factory thickness
there is a thread on here somewhere that gives all this info in depth
Rodger. I had to do the channel repair common of all cars and "lost" the holes
Thanks!
Quote from: tan top on January 06, 2021, 05:34:51 PMbottom of the clips touch the bottom of the channel like on your top clip in the picture
have a look here
Can someone explain there measurements where they're coming off from?
http://www.dodgecharger.com/forum/index.php/topic,31064.0.html
Quote from: tan top on January 06, 2021, 05:34:51 PMbottom of the clips touch the bottom of the channel like on your top clip in the picture
have a look here
http://www.dodgecharger.com/forum/index.php/topic,31064.0.html