The Daytona valance is bent in places and has about 4 inches cut off each end... Yes, the side marker area.
The frame to nose bulkhead brackets are in original condition, never cleaned up or lightly media blasted.
I'll have pics tomorrow. Any input will be appreciated. Thanks!
I'd be interested in both parts :2thumbs:
pics... Keep in mind the extensions have a unique part number (3412xxx)for the Daytona. Super Birds have a different number. Not sure what's different between them.
wow talk about rare,
I do know a NOS valance sold for 3.5k when the economy was Poo 4 years ago, thats gotta be a 1500 part because the parts just dont exist
Quote from: odcics2 on June 02, 2016, 01:34:09 PM
pics... Keep in mind the extensions have a unique part number (3412xxx)for the Daytona. Super Birds have a different number. Not sure what's different between them.
Superbird C frames are indeed Superbird only, while the Z bar bolt pattern is the same, the 2 frame bolt slots are in a different location, plus the lower lips have slotted provisions for bolting the Bird's center reinforcement strip, center valance, and lower fender valance end pieces, the Daytona's lower lips of the C frames only have provisions for the center support brace which supports the front lip of the lower valance, the C frames are not interchangeable without major hacking and Swiss-Cheesing
Mike
Thanks Mike, for the clarity. :cheers:
Any Daytona parts are rare to come by. I have to imagine $2,000 wouldn't be out of the question for all the parts shown. If I needed them I would hesitate.
I had rough daytona z brackets alan v ended up with them. http://www.dodgecharger.com/forum/index.php/topic,46821.0.html
Quote from: Nwcharger on June 01, 2016, 05:43:54 PM
I'd be interested in both parts :2thumbs:
Your in box is full......