DodgeCharger.com Forum

Discussion Boards => Aero Cars => Topic started by: Wingnut426 on February 19, 2020, 06:32:34 PM

Title: COPART Daytona clone project
Post by: Wingnut426 on February 19, 2020, 06:32:34 PM
https://www.copart.com/lot/31061130
Title: Re: COPART Daytona clone project
Post by: 70 sublime on February 19, 2020, 07:05:29 PM
Want It Now?
Minimum Bid: $25,000 USD

This vehicle is being sold as "as is - where is". All bids are binding and all sales are final.

4 days and about 18 hours remaining at this moment

XP29H9B391930
Title: Re: COPART Daytona clone project
Post by: tan top on February 19, 2020, 07:16:21 PM
 :popcrn:

XP29H9B391930
Title: Re: COPART Daytona clone project
Post by: tan top on February 19, 2020, 07:16:37 PM
 :popcrn:
Title: Re: COPART Daytona clone project
Post by: Alaskan_TA on February 20, 2020, 12:54:03 PM
 :smilielol: at the dash rivets.

Run Forest, run!
Title: Re: COPART Daytona clone project
Post by: 70 sublime on February 20, 2020, 04:01:19 PM
Quote from: Alaskan_TA on February 20, 2020, 12:54:03 PM
:smilielol: at the dash rivets.

Run Forest, run!

Look at the rear 1/4s where the marker lights go
They look like the bigger holes for a 70 and not the smaller 69 style
Car is a 70 with a different VIN ???
Title: Re: COPART Daytona clone project
Post by: Dave Kanofsky on February 20, 2020, 04:56:01 PM
There's a faint bell in the back of my head that seems to remember this car for sale quite a few years ago, with big wide pro-street tires on the back.  It's the colors and expanded metal headlight covers that stick in my mind. 

Sound familiar to anyone else?
Title: Re: COPART Daytona clone project
Post by: wingcar on February 20, 2020, 08:53:40 PM
Quote from: Dave Kanofsky on February 20, 2020, 04:56:01 PM
There's a faint bell in the back of my head that seems to remember this car for sale quite a few years ago, with big wide pro-street tires on the back.  It's the colors and expanded metal headlight covers that stick in my mind. 

Sound familiar to anyone else?
.                             

I too remember this one being on sale a year or so back (give or take).  If I remember correctly it was priced at something like $15000.00.......it may have been on Craigslist...

Title: Re: COPART Daytona clone project
Post by: chicago mopars on February 21, 2020, 12:26:50 AM
Quote from: Dave Kanofsky on February 20, 2020, 04:56:01 PM
There's a faint bell in the back of my head that seems to remember this car for sale quite a few years ago, with big wide pro-street tires on the back.  It's the colors and expanded metal headlight covers that stick in my mind. 

Sound familiar to anyone else?



HLPAG was selling it years ago
Title: Re: COPART Daytona clone project
Post by: djcarguy on February 21, 2020, 04:54:48 AM
Quote from: wingcar on February 20, 2020, 08:53:40 PM
Quote from: Dave Kanofsky on February 20, 2020, 04:56:01 PM
There's a faint bell in the back of my head that seems to remember this car for sale quite a few years ago, with big wide pro-street tires on the back.  It's the colors and expanded metal headlight covers that stick in my mind. 

Sound familiar to anyone else?
.                             

I too remember this one being on sale a year or so back (give or take).  If I remember correctly it was priced at something like $15000.00.......it may have been on Craigslist...


  iam sure was here before.. all that tub work an still leaf spring setup.think was bill of sale before with eng an trans,wide tires.  was in front of guys shop with rusty ragtop covered on pass side,like 68 cuda?  will look for info ???


Title: Re: COPART Daytona clone project
Post by: djcarguy on February 23, 2020, 04:10:58 PM
GET those bids in SALE ends MONDAY < don't bee late to win the bid on this one off special '' DAYTONA ''   :drool5: :drool5: ;D ;D :D :D :2thumbs:
Title: Re: COPART Daytona clone project
Post by: billssuperbird on February 23, 2020, 06:30:46 PM
Why does the car not have a Daytona rear window and plug on it
Title: Re: COPART Daytona clone project
Post by: A383Wing on February 23, 2020, 07:08:37 PM
Quote from: billssuperbird on February 23, 2020, 06:30:46 PM
Why does the car not have a Daytona rear window and plug on it


it's not a real Daytona
Title: Re: COPART Daytona clone project
Post by: djcarguy on February 23, 2020, 09:20:53 PM
Quote from: djcarguy on February 23, 2020, 04:10:58 PM
GET those bids in SALE ends MONDAY < don't bee late to win the bid on this one off special '' DAYTONA ''   :drool5: :drool5: ;D ;D :D :D :2thumbs:

  WAS UP TO $1300. by saturdaynite at 10:00??  but oddly reserve not met ???  BYE IT NOW $25,000  ??? HAHAHA APRIL 1 YET ???25kKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKKK ?? ITS REALLY NOT REAL ??? OOOOOH
Title: Re: COPART Daytona clone project
Post by: Highbanked Hauler on February 24, 2020, 05:23:46 PM
 Sheetmetal dash and the vin tag appears to be to far forward. When I was going to stock car my 68 I cut the dash back about where the edge of theirs is.
Title: Re: COPART Daytona clone project
Post by: djcarguy on March 03, 2020, 11:12:05 AM
 :popcrn: :popcrn:  WOW says bid up to $13,200....................reserve not met,,  but they lowered the buy now way down to 24,900 k  ???they came down a whopping$100.                 what a cut up stripped pile,an can bee your pride an joy for @24,900 k  
:icon_smile_big: :icon_smile_big: :smilielol:
Title: Re: COPART Daytona clone project
Post by: Swampwing2 on March 03, 2020, 11:51:22 AM
Looks like a possible window plug and bird fenders on the 70 Plymouth with a cage, right next to it. Wonder if they came from the same place.