Print Page - 3 speed wiper wiring

Title: 3 speed wiper wiring
Post by: frank1966 on January 12, 2017, 07:57:02 PM

Does the motor in the engine bay have a ground strap to one of the mounting bolt? Any pics of the wiring?

Does the wiper switch need a ground?

There is a brown wire that jumps 2 terminals on the switch. Is this necessary in order for the motor to work?

Is there a diagram for each of these wires and what they do including the washer switch?

Title: Re: 3 speed wiper wiring
Post by: M5Ivan on January 13, 2017, 02:11:12 PM

Here's mine that I just removed to send off for a refurb unit. I've circled the ground strap that attaches to one of the mounting bolts. I don't have any info on your other questions.

Title: Re: 3 speed wiper wiring
Post by: frank1966 on January 25, 2017, 07:48:05 PM

I can't figure out the other terminals on the switch. My connector has the 4 wires going to the motor and a feed. That's 5 terminals I know.

Title: Re: 3 speed wiper wiring
Post by: frank1966 on February 13, 2017, 02:30:03 PM

Anybody know if there is a jumper brown wire that connects 2 terminals?

Title: Re: 3 speed wiper wiring
Post by: Lennard on February 14, 2017, 12:35:37 AM

Quote from: frank1966 on February 13, 2017, 02:30:03 PM
Anybody know if there is a jumper brown wire that connects 2 terminals?

Yes, there is.

Title: Re: 3 speed wiper wiring
Post by: frank1966 on February 14, 2017, 10:21:16 AM

Thanks

DodgeCharger.com Forum

Mopar Garage => Electric, Gauges, & Lights => Topic started by: frank1966 on January 12, 2017, 07:57:02 PM