I know I haven't been around much...nowhere near as mcuh as I'd like....I feel kinda useless since chryco and firefigher and a few others all beat me to answering the questions in the tech area's before I can...so I'm left either saying "yes I agree" "what he said" or adding a short something.... :rotz:
anyways, I just got the heads back from the machine shop for their decking and getting the exhaust valves setup... so I have a bit more to clean up as you can see from the pics and then back to the machine shop for a 30 degree back-cut, reset the geometry and a jet-wash/hot tank and they are ready to go on the car...
unfortunately since I'm tring to pay for a wedding, honeymoon, and currently unemployed since I can't seem to find a job (anyone need a CSEE?!?!?), I'm trying to finish this up with about $200....I was really hoping to be able to afford a set of iron ductiles and get a solid cam, lifters, pushrods and the valve assembly...but it looks like I'm going to be stuck going with a hydrallic cam and reusing pushrods, rockers and everything else. :(
here they are
(http://members.mordkessel.com/Belina/P2212124.jpg)
(http://members.mordkessel.com/Belina/P2212125.jpg)
(http://members.mordkessel.com/Belina/P2212126.jpg)
(http://members.mordkessel.com/Belina/P2212127.jpg)
(http://members.mordkessel.com/Belina/P2212128.jpg)
(http://members.mordkessel.com/Belina/P2212129.jpg)