1-1/4" sway bar on '70 control arm. Solution to make it stronger? Just weld on some reinforcement, or come up with a stronger end link mount?
(https://i.imgur.com/cHSVmmf.jpg?1)
I'm sure that somehow developed a hairline crack in the metal during it's lifetime, and that's now the end result of that sway bar mount tab.
But i guess you can repair it if you weld, but Hotchkis makes and sells nice repop ones, but you would still need to weld the new one onto the LCA.
I think is the first time I see that. Meaning with this, it should be an easy fix and still hard to beat with no extra reinforcement more than a good weld job