Text only | Text with Images

DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: b5blue on July 09, 2021, 01:00:59 PM

Title: 70 Charger filler tube to trunk floor seal placement?
Post by: b5blue on July 09, 2021, 01:00:59 PM
My new seal has metal embedded around the edge and a small ridge up from the perimeter. Should the ridge point up or down?  :shruggy: 
Title: Re: 70 Charger filler tube to trunk floor seal placement?
Post by: armor64 on July 09, 2021, 01:14:59 PM
i went down, so it adds a bit of extra seal to the floor when it compresses. plus looks better
Title: Re: 70 Charger filler tube to trunk floor seal placement?
Post by: b5blue on July 10, 2021, 01:39:28 PM
Thanks! Well I tried both ways and it fits like crap no matter. I give up on repop anything anymore.  :RantExplode:
Title: Re: 70 Charger filler tube to trunk floor seal placement?
Post by: hemi-hampton on July 10, 2021, 03:59:57 PM
Typical poor fit after market :brickwall:
Title: Re: 70 Charger filler tube to trunk floor seal placement?
Post by: b5blue on July 10, 2021, 11:56:29 PM
Yup fill tube off and wrong vent tube bending, stainless tank not crimped for straps properly and supposedly adjusted fuel gauge sender shows 1/4 tank full with 13 gallons added.  :lol: 
Text only | Text with Images