Print Page - Show me how you held your dash shell while you assembled it.

Title: Show me how you held your dash shell while you assembled it.
Post by: 66FBCharger on May 04, 2023, 11:13:08 AM

All,
I'm planning to start assembling my Rallye dash ('70 road runner) very soon. I've searched but was not successful finding photos of fixtures to hold the dash shell securely as I add all the components back to the dash shell.
What do you have for pictures that will help me build what I need to do the job?
Thanks,
John

Title: Re: Show me how you held your dash shell while you assembled it.
Post by: 1970Moparmann on May 05, 2023, 02:19:39 PM

Here is what I did.

Title: Re: Show me how you held your dash shell while you assembled it.
Post by: NickJ on May 05, 2023, 04:48:57 PM

Here's how I did mine. Bought a single 2 X 4 and cut 3 "legs". I then screwed the legs to a sheet of plywood I cut to fit for storage.

Title: Re: Show me how you held your dash shell while you assembled it.
Post by: 66FBCharger on May 16, 2023, 07:41:07 PM

Thanks to all that replied. Those pictures were a great help.

DodgeCharger.com Forum

Mopar Garage => Interior => Topic started by: 66FBCharger on May 04, 2023, 11:13:08 AM