DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: Alec on August 20, 2017, 11:07:51 AM

Title: Vinyl roof trim removal
Post by: Alec on August 20, 2017, 11:07:51 AM
Hi All
             I need to remove the trim at the bottom of the vinyl roof ...the roof is lifting from the trim up an area about 3 x 6 inches..how does the trim come off?  To repair I was just going to peel it back re glue and replace...no rust car was redone 3 years ago... thoughts
Title: Re: Vinyl roof trim removal
Post by: Dino on August 21, 2017, 04:27:40 PM
Quote from: Alec on August 20, 2017, 11:07:51 AM
Hi All
             I need to remove the trim at the bottom of the vinyl roof ...the roof is lifting from the trim up an area about 3 x 6 inches..how does the trim come off?  To repair I was just going to peel it back re glue and replace...no rust car was redone 3 years ago... thoughts

Speed nuts accessible through the trunk if I recall.
Title: Re: Vinyl roof trim removal
Post by: green69rt on August 21, 2017, 05:43:42 PM
Quote from: Dino on August 21, 2017, 04:27:40 PM
Quote from: Alec on August 20, 2017, 11:07:51 AM
Hi All
             I need to remove the trim at the bottom of the vinyl roof ...the roof is lifting from the trim up an area about 3 x 6 inches..how does the trim come off?  To repair I was just going to peel it back re glue and replace...no rust car was redone 3 years ago... thoughts

Speed nuts accessible through the trunk if I recall.

Yes, if you are talking about where the vinyl  meets the quarter or at the bottom of the back window.  If at the tops of the side windows, then that trim just pries off but be careful you don't bend it up.  It might even have some adhesive to hold it on.