I ve got no flashers or clock,but wiggle the headlight switch and the clock comes back on.
I ve fitted a rebuilt dimmer switch and a rebuilt headlight switch but to no avail.
It's a new m and h harness too.
I m at my wits end!!
Anyone have any ideas.
Do you know your clock works for sure in the first place ?
Yeah the clock works
Turn signals work ?
Did you change the direction signals switch in the steering column ?
Turn signals work but not flasher
I ve changed the voltage limiter to a solid state and changed the fuel gauge.
Put it back together and it's not working
Lights do nt work either
So if you have a test light - a 12v light. Maybe start with the fuse block. There are two buss bars on the back - one is constant hot, the other is switched with the key. Start looking for 12 v power there as a starting point. The clock and headlights always have power. The amp meter on the dash, maybe the fuseible link by the bulkhead; both likely trouble spots.
Check grounding for dash frame and Haz. flasher unit for function