Text only | Text with Images

DodgeCharger.com Forum

Mopar Garage => Electric, Gauges, & Lights => Topic started by: C500 on May 17, 2021, 05:26:56 PM

Title: Ignition module / wiring setup advice needed
Post by: C500 on May 17, 2021, 05:26:56 PM
Hey gang... I'm after some electrical input for setting up my rebuilt 440 in the '69.

Here's what I have:

Hi-Rev 7500 ignition module
Firecore Electronic Distributor
New Mopar Voltage Regulator - Electronic Solid state
Ballast resistor

Any comments or advice on this setup welcome please...




Title: Re: Ignition module / wiring setup advice needed
Post by: Canadian1968 on May 26, 2021, 10:15:11 PM
What exactly are you asking ?  How to actually wire everything together ?

Just type in Mopar electronic ignition diagram into Google .

Or just search on this site
Text only | Text with Images