Print Page - Need to know what fasteners attach the hood release lever on a 68 charger

Title: Need to know what fasteners attach the hood release lever on a 68 charger
Post by: 1st_charger on February 05, 2018, 04:32:26 PM

On a 68 charger what bolts or screws hold the hood release lever to the grill support and does anyone have a picture? Thanks for any help!

Title: Re: Need to know what fasteners attach the hood release lever on a 68 charger
Post by: Obi Ben Dover on February 05, 2018, 05:36:56 PM

These are on my 69 but are probably the same for a 68 the heads are 7/16.

Title: Re: Need to know what fasteners attach the hood release lever on a 68 charger
Post by: 1st_charger on February 05, 2018, 05:42:47 PM

Thanks but the 69 and 68 are different because of the grill design.

Title: Re: Need to know what fasteners attach the hood release lever on a 68 charger
Post by: Obi Ben Dover on February 05, 2018, 07:46:57 PM

You your right release is in the middle on 68 instead of off to the side, but the fasteners are probably the same.

Title: Re: Need to know what fasteners attach the hood release lever on a 68 charger
Post by: 68RT440 on February 05, 2018, 08:26:50 PM

They are #10 pan head Phillips head screws. The actual size is 10-12x.62". That's straight from my fastener reference manual.

Title: Re: Need to know what fasteners attach the hood release lever on a 68 charger
Post by: gtx6970 on February 06, 2018, 05:18:09 PM

Quote from: 68RT440 on February 05, 2018, 08:26:50 PM
They are #10 pan head Phillips head screws. The actual size is 10-12x.62". That's straight from my fastener reference manual.

Yep

DodgeCharger.com Forum

Mopar Garage => Paint, Body & Trim => Topic started by: 1st_charger on February 05, 2018, 04:32:26 PM