I have been collecting components to make the birdible a three speaker dash and make the AM 8 track look correct .
can any one get me mesurements to cut holes for my speaker covers ?
I hit the jack pot in minnesota this year at mopars in the park got my speaker grille for 20.00 , and several tranformer boxes and a spare wiring harness for 50.00
:drool5: anyone know what this bigger box is for ? cassette set up ? it has the same plug ?
:popcrn:
:drool5:
Do you have a regular AC dash that you'd want to trade for a 8 track dash?
Quote from: Tilar on August 23, 2009, 07:03:04 PM
Do you have a regular AC dash that you'd want to trade for a 8 track dash?
my dash is installed and working ,not really willling to take it out again
Alright, I have the dash out and can get you some measurements. I'll swing by the shop tomorrow and get them and if nobody has the measurements by then I'll post them when I get home in the morning.
Quote from: Tilar on August 23, 2009, 07:15:53 PM
Alright, I have the dash out and can get you some measurements. I'll swing by the shop tomorrow and get them and if nobody has the measurements by then I'll post them when I get home in the morning.
thanks
no body have a 3 speaker dash ????
I forgot I had a dentist appt right after work. :eek2: Anyway, I hope you can make heads or tails out of this. My drawing is a little out of proportion too. :P
Speaker holes are 3-3/16 across, The holes for the cover are smaller than 1/8 inch and on 2.765 centers and square. The two holes nearest the windshield are in line with the edge of the holes for defroster ducts. Not with the actual hole, but where the hole recesses in for the covers.
The 10-1/8 and 9-15/16 from the speaker cover holes to the defrost hole is going to the actual cutout for the defroster ducts.
It seemed odd that they are different measurements from the edges of the ducts to the closest hole from one side to the other but I double and triple checked them.
The 6.075 and the 6.245 measurements are with the dash out so they really wont help you much.
(http://i64.photobucket.com/albums/h177/Wolian/Boards/Dodgechargerdotcom/3Speaker.jpg)
thanks dude your awesome
:2thumbs: :2thumbs: :2thumbs:
Glad I could help. Now, I just gotta buy an 8 track player or find a standard dash that has AC. My car is a 318 with a 3 speed on the tree and had only one option on it, an AM Radio. I bought the dash because it was an A/C dash. I plan on adding a few options to it (A/C, 440 and an A512) but I'm not sure if an 8 track is one of them... Time will tell. :scratchchin:
Quote from: Tilar on August 24, 2009, 04:40:23 PM
Glad I could help. Now, I just gotta buy an 8 track player or find a standard dash that has AC. My car is a 318 with a 3 speed on the tree and had only one option on it, an AM Radio. I bought the dash because it was an A/C dash. I plan on adding a few options to it (A/C, 440 and an A512) but I'm not sure if an 8 track is one of them... Time will tell. :scratchchin:
I have a core 8 track radio , it will look good in the dash but never work . Just stick and 8 track tape in it for looks and put aftermarket radio under the dash . 225.00 for it
Search Result For "2884863"
Part # Application Description
2884863 1969-71 crossover Mtg plate & cover
2884863 69-74 RADIO CROSSOVER
2884863 69-74 MULTIPLEX CROSSOVER,PU
2884863A 1969-71 MULTIPLEX CROSSOVER
Quote from: nascarxx29 on August 25, 2009, 03:34:02 PM
Search Result For "2884863"
Part # Application Description
2884863 1969-71 crossover Mtg plate & cover
2884863 69-74 RADIO CROSSOVER
2884863 69-74 MULTIPLEX CROSSOVER,PU
2884863A 1969-71 MULTIPLEX CROSSOVER
I know what that one is it is for 8 track and mounts on the back of the glove box cardboard
, what about the big flat one ? 2820 885 ?
Quote from: moparstuart on August 25, 2009, 10:53:20 AM
Quote from: Tilar on August 24, 2009, 04:40:23 PM
Glad I could help. Now, I just gotta buy an 8 track player or find a standard dash that has AC. My car is a 318 with a 3 speed on the tree and had only one option on it, an AM Radio. I bought the dash because it was an A/C dash. I plan on adding a few options to it (A/C, 440 and an A512) but I'm not sure if an 8 track is one of them... Time will tell. :scratchchin:
I have a core 8 track radio , it will look good in the dash but never work . Just stick and 8 track tape in it for looks and put aftermarket radio under the dash . 225.00 for it
Thanks but that's a little too rich for my blood for a non working unit. I'm sure it would look good but if I go that route I'd probably go ahead and spend the money for a working one and all the goodies.
Quote from: Tilar on August 25, 2009, 04:14:25 PM
Quote from: moparstuart on August 25, 2009, 10:53:20 AM
Quote from: Tilar on August 24, 2009, 04:40:23 PM
Glad I could help. Now, I just gotta buy an 8 track player or find a standard dash that has AC. My car is a 318 with a 3 speed on the tree and had only one option on it, an AM Radio. I bought the dash because it was an A/C dash. I plan on adding a few options to it (A/C, 440 and an A512) but I'm not sure if an 8 track is one of them... Time will tell. :scratchchin:
I have a core 8 track radio , it will look good in the dash but never work . Just stick and 8 track tape in it for looks and put aftermarket radio under the dash . 225.00 for it
Thanks but that's a little too rich for my blood for a non working unit. I'm sure it would look good but if I go that route I'd probably go ahead and spend the money for a working one and all the goodies.
yeah i know but most nice working units sell for about 500 bucks now :scared: :scared: :scared: :scared: :scared: :scared: :scared: :scared: and you dont get the correct wiring harness or the little transformer box. Thats has been my problem finding all the little stuff also
:popcrn: my score for the superbird convertible
zeppelin , beatles , tull , deep purple , moody blues
:popcrn:
Quote from: moparstuart on August 24, 2009, 09:57:47 AM
no body have a 3 speaker dash ????
stuart i have the 70 3-speaker dash ill get you the measurments today
Good taste in music there buddy!!
oh i see you got the measurements sorry
Quote from: Bigblocktony on September 06, 2011, 09:46:18 AM
oh i see you got the measurements sorry
thanks i still have not cut my dash , but i will someday i have all the stuff i need i think to do the conversion just need to do it .
That's some pretty good music you found there. I have "Days of future past" on vinyl along with 5 or 6 other Moody Blues albums.
did the speaker dash setup !! have a rear speaker too ??
Quote from: tan top on September 06, 2011, 06:12:24 PM
did the speaker dash setup !! have a rear speaker too ??
Not in a convertible :nana: :eek2: one in every crowd...
Quote from: thedodgeboys on September 06, 2011, 08:27:41 PM
Quote from: tan top on September 06, 2011, 06:12:24 PM
did the speaker dash setup !! have a rear speaker too ??
Not in a convertible :nana: :eek2: one in every crowd...
yeah hide them where ever you can
:drool5:
Break in on this old post but I have a related question.
I'm converting my standerd dash into a 3-speakerdash at the moment. Speakers, harness and 8-track player are in, now the crossoverbox needs to get in.
I know this box is somewhere behind the glovebox. Anyone got a pic where it is located? Thanks in advance.
Serge
I can't offer a picture, but I can tell you where it sits. It is screwed to the right top of the glove box liner. The cardboard liner has two holes punched out so you can lay the crossover box on top of the box and the screws go through the liner into the metal of the crossover. Hope this helps, WINGNUT
Quote from: Wingnut426 on February 12, 2024, 09:50:06 PMI can't offer a picture, but I can tell you where it sits. It is screwed to the right top of the glove box liner. The cardboard liner has two holes punched out so you can lay the crossover box on top of the box and the screws go through the liner into the metal of the crossover. Hope this helps, WINGNUT
Thanks Wingnut, I'll check out the liner for the holes :2thumbs:
Quote from: Wingnut426 on February 12, 2024, 09:50:06 PMThe cardboard liner has two holes punched out so you can lay the crossover box on top of the box and the screws go through the liner into the metal of the crossover.
Got the glovebox out and the holes are there. Crossover doesn't line up with the holes.
Is my crossover not an 1969 model perhaps? Or are the holes in the wrong place in the aftermarket glovebox?
See here:
https://flic.kr/p/2pxWyqM
https://flic.kr/p/2pxWyqG
Your crossover has a 1970 date code. From what I remember, my crossover in my 69 Charger is wider. Pete
Quote from: Wingnut426 on February 13, 2024, 09:07:47 PMYour crossover has a 1970 date code. From what I remember, my crossover in my 69 Charger is wider. Pete
That explanes it :2thumbs:
Thanks for your help Pete.
Serge
Little late to the party here but I have an under dash unit and getting to the dash speaker is a nighmare! so I wired those lil' 3x5's under the dash on drivers side and inside the dick panel on pax side. now it sounds like crap but its an 8-8track so there's no real expectation of quality anyway
on a related note just yesterday bought these off FB market place. I just wanted the RUSH tapes but found a bunch of good one. might be willing to let the Englebert Humperdinck tapes go cheap lol