DodgeCharger.com Forum

Mopar Garage => Electric, Gauges, & Lights => Topic started by: J-440 on September 01, 2009, 07:53:03 PM

Title: Console wiring harness for floor shifter
Post by: J-440 on September 01, 2009, 07:53:03 PM
  Does anyone make the floor console harness that connects the center console courtesy lights, shifter light, and reverse activator switch that runs under the driver seat and joins with the taillight harness running by the door sill, and finally connecting to the main harness in the kick panel?  Sorry about the run-on sentence.  Year-One, MH Electric and The Paddock don't seem to make a repro.  Any advice?
Title: Re: Console wiring harness for floor shifter
Post by: Ghoste on September 01, 2009, 08:42:04 PM
Bill and Rose Evans.
Title: Re: Console wiring harness for floor shifter
Post by: gasoline_24 on September 01, 2009, 09:54:19 PM
Do they also make a power window harness for 68?  Sorry for the highjack.  How are they contacted?
Title: Re: Console wiring harness for floor shifter
Post by: Ghoste on September 01, 2009, 10:04:29 PM
You can e-mail at:
rbevans7@aol.com

Bill & Rose Evans*8835 Parson Rd*Erie,PA*16509
phone (814) 864-2622*fax (814) 866-8184

There is a website at;
http://evanswiring.tripod.com/

But I have never had much luck with it personally.
Title: Re: Console wiring harness for floor shifter
Post by: J-440 on September 02, 2009, 05:43:06 PM
  Thanks Ghoste...I'll give them a call.  You have a good one. :2thumbs:
Title: Re: Console wiring harness for floor shifter
Post by: gasoline_24 on September 02, 2009, 09:14:30 PM
Emailed them today and the cost is $75.00.  They do not make the power window harness though.
Title: Re: Console wiring harness for floor shifter
Post by: Beauregard Duke on September 03, 2009, 06:53:42 AM
Quote from: J-440 on September 01, 2009, 07:53:03 PM
  Does anyone make the floor console harness that connects the center console courtesy lights, shifter light, and reverse activator switch that runs under the driver seat and joins with the taillight harness running by the door sill, and finally connecting to the main harness in the kick panel?  Sorry about the run-on sentence.  Year-One, MH Electric and The Paddock don't seem to make a repro.  Any advice?

I bouth from Herb's parts.