I am preparing to start restoring the wiper linkage on my '69 Charger. I plan on sanding and painting the linkage and installing the wiper pivot water seal kit (YO # XH83). This should be a releatively straighforward task.
However, before I get started I'll need the bushings, retainer and the spring washer used on the linkage.
Attached is a page from the '69 parts catalogue which shows the linkage as well as the bushings, retainer and the spring washer.
Can someone please tell me what I need to buy to complete this project?
I'd like to get all these items from YO but they only seem to carry the "wiper motor linkage nylon bushing" (p/n WB22) and it doesn't state which particular bushing it is.
Is it the white bushing that goes between the crank and the link or do I need 3 of them, the ones that go between the pivots and the links? :shruggy:
What about the retainer & the spring washer?
Ultimately, I was hoping they had a kit like they do for the E-Body guys. Does anyone else carry such a kit for the '69 B-Bodies?
Thanks in advance, Shakey.
Is it a two or three speed motor? I have the bushing ,spring washer and clip off a two speed unit.
Quote from: y3chargerrt on August 16, 2006, 01:40:09 PM
Is it a two or three speed motor? I have the bushing ,spring washer and clip off a two speed unit.
It's a 3 speed wiper motor.
All I really need is the white plastic piece. I see that I can get the others from YO in a kit, they look pretty universal, however the one white piece seems to be more difficult to find.
Im on the road heading to the Dream Cruise and Moparfest. I will check the parts books when I get home. If the 2 and 3 speed bushing is the same I will hook you up. Thats assuming I can find it.. ;)
I am pretty sure that the 3 speed and 2 speed plastic cams are different. I know when I swapped out my 2 spd to 3 speed wiper motor, the off set arm was different and so was the plastic cam. I do not remember what color it was though.
Quote from: y3chargerrt on August 18, 2006, 07:27:52 AM
Im on the road heading to the Dream Cruise and Moparfest. I will check the parts books when I get home. If the 2 and 3 speed bushing is the same I will hook you up. Thats assuming I can find it.. ;)
No need to look, I found one at Moparfest for $2.00 CDN.
Thanks just the same for trying to help! Much appreciated.
I already strat a new topic but just wanna let you know that i'm looking for all the kit wiper linkage... if anyone can help me plz thanks in advance