Hello all just wondering where the black needs to start and finish on the inner doors for black interior. also is the paint gloss ,satin or flat black
As far as I know if you look at your door it has the rubber door seal that goes down the two ends and acroos the bottom and where the seal goes it has a bunch of little holes for the seal clips to go into
Split the paint colour on the row of little holes and go right to the glass opening at the top
Not sure on the colour of black to use
Same Gloss X9 Black that would have gone on the exterior of the car.
Quote from: RTSE440 on April 25, 2022, 05:50:37 AM
Hello all just wondering where the black needs to start and finish on the inner doors for black interior. also is the paint gloss ,satin or flat black
Quote from: birdsandbees on April 25, 2022, 10:10:04 AM
Same Gloss X9 Black that would have gone on the exterior of the car.
:iagree:
As for the start-stop patterns, see the photos below:
(http://www.dodgecharger.com/forum/index.php?action=dlattach;topic=48725.0;attach=115840)
(http://www.dodgecharger.com/forum/index.php?action=dlattach;topic=48725.0;attach=115841)
(http://www.dodgecharger.com/forum/index.php?action=dlattach;topic=48725.0;attach=115842)
(http://www.dodgecharger.com/forum/index.php?action=dlattach;topic=48725.0;attach=115843)
Have any others seen the dividing line like this on the bottom of the door? As far as I know this door is original paint.
It alsmost looks like a little white paint on the rubber door seal ?
Maybe the white was repainted at one time ?